I don't know if this has been covered in prevoius posts, but if so, I couldn't find any. Due to age (80) and some recent health issues I find removing and remounting wheels on my car(s) to be extermely difficult.There are a number of companies that make threaded pins that screw into threaded bolt holes in that type of hub and facilitate lining up the wheel to the hub much easier. Absent such a tool on the market tool I'm thinking of buying some 1/2-inch ID steel tubing and cutting the threadis myself, but would obviously prefer buy the tool aready made. Has anyone found such a tool or can suggest a another possible work-around for this/my problem?.

Thanks,