does anyone know where i can get this little wire harness that powers up the ipod module ? it is basically the cable that provides power to the module. it has 4 wires on it and im not sure where on the car it is connected but pic shows where it should be on the module.

vehicle is a 2006 S Type None Navi type radio

 

this is what i am talking about... here is the missing wire:

 

Your only hope is the dealer. Do you have the JTIS and the JEPC??

They are both on this site for free. They are a really big help when figuring out things!!
.
.
.

 

darn gone it!! they dont sell "just the wire" from Jag...need to buy the complete set for $400. that sucks!! i wish i had the diagram of the darn thing, i would just make my own harness. anyone know where i can find a diagram for the wire harness?

 

i think i found them but there is nothing in there about the ACM

 

well, if anyone has a diagram or knows what the 4 wires are please let me know. im guessing one is a constant ground, other is constant power, and ignition power...but not sure what the 4th would be. i will not attempt anything unless i am 100% sure i know what the wires are.

 

rest of the wires are there...



this is the ACM module

 

thanx for the manual. basically its the main harness that pull power from the head unit for the ACM. there are just 4 wires pulled from it going to the ACM...damn, thats what i wana know is where the wires are tapped into the main harness.

 

That looks to be the same manual I downloaded where the free handbook sticky says.

Still, not everyone finds stickies....