Hi all,
My Rear reg lights on my x350 have pretty much melted the housing around them. The bulbs work when I move them around a bit but then only intermittently. The actual socket the bulb plugs into is badly corroded and needs replacing.
Can anyone tell me what do I need to order and from where (ideally in the uk)
Any help appreciated.
Cheers.
Joe

 

Have a look here for part numbers and then a bit of googling...

https://www.parts.com/index.cfm?fuse...2-%20Liter-GAS

 

Local jag dealer they won't be to expensive or sng the bulb holder comes with it

 

SNG Barratt - The Ultimate Jaguar Parts Specialist Is this what you looking for

 

SNG Barratt - The Ultimate Jaguar Parts Specialist and this is the other one

 

Thanks for this. But that just seems to be the cover for the bulb. I have both of those. It's the part, whatever the bulb actually sits into that I need. It doesn't appear to be on the diagram woox4 sent either. It all seems to be just the housing :/

 

What is your last six on your chassis number

 

The ones Clifton posted should be the complete assembly

 

Thanks so much. Ok. The last six of the chassis are: H09145

 

The only other part is the housing that the number plate lamps assembly's sit in I think the part you need is the part I have give you a link to it comes as a complete unit with the bulb holder

 

Fantastic!! Thanks so much. I'll go ahead and order it. I'll let you know when it arrives. Really appreciate all your help.
Cheers. Joe

 

Don't forget there is a lh and a rh side

 

Done! Yea, I seen that. Here in 3-5 days. So happy days!

 

And look to replace with LEDS. The bulbs and resistance causes heat and melting.

 

Thanks. What's involved in changing to LED's?

 

2x T10 CANBUS 5630 6 SMD LED ERROR FREE 501 194 W5W Car Side Wedge Light Bulb | eBay I think this is what you want

 

Thanks Clifton94! Got those units in from Barratts and fitted them today. As good as new.
Cheers
Joe