XJ XJ8 / XJR ( X308 ) 1997 - 2003

air cleaner tube question

Thread Tools
 
Search this Thread
 
Old May 4, 2017 | 05:38 PM
  #1  
Kejar7's Avatar
Thread Starter
|
Member
Joined: May 2017
Posts: 55
Likes: 7
From: Alberta Beach, Alberta
Default air cleaner tube question

Hi
Just purchased a 2002 XJ8, I bought it as a bit of a project as my 1998 xj8 was wrote off a few years ago.
My new used XJ8 was found to have a rag shoved into a hole at the bend of the air cleaner intake tube adjacent to the firewall ( it looks like there may have been a plastic plug about 1" in Diameter from the factory).
I found a small plastic plug with which I filled the hole and glued it in there, and it did of course bring the idle down a bit, but does anyone know what was suppose to be in there? Was it a plug or am I missing a hose of some sorts.
Cheers,
Kejar7
 
Reply
Old May 4, 2017 | 05:44 PM
  #2  
JBzXJ40's Avatar
Senior Member
Joined: Mar 2016
Posts: 859
Likes: 322
From: Auckland NZ/ Houston, TX
Default

Are you referring to the straight piece that "T's" off from the curved section? If so, that was put in to supress the noise of the intake. Doesn't really have a purpose for anything else. I believe that some models, supercharge I think don't even have that as part of the air intake. Someone with an R model might be able to confirm this.
 
Reply
Old May 4, 2017 | 05:47 PM
  #3  
Kejar7's Avatar
Thread Starter
|
Member
Joined: May 2017
Posts: 55
Likes: 7
From: Alberta Beach, Alberta
Default

Hi Yes that would be the area in question. I guess I will just leave my plug glued in there. LOL
 
Reply
Old May 4, 2017 | 05:47 PM
  #4  
JBzXJ40's Avatar
Senior Member
Joined: Mar 2016
Posts: 859
Likes: 322
From: Auckland NZ/ Houston, TX
Default

If you look in this picture, where the bend is going to Throttle Body, that's where the "silencer" piece would be, but I'm pretty sure that the R models didn't have it.














 
Reply
Old May 4, 2017 | 05:50 PM
  #5  
Kejar7's Avatar
Thread Starter
|
Member
Joined: May 2017
Posts: 55
Likes: 7
From: Alberta Beach, Alberta
Default

Just looking at the diagram and that area is at the opposite end I am asking about. The end I am asking about is adjacent to the firewall.
 
Reply
Old May 4, 2017 | 05:56 PM
  #6  
JBzXJ40's Avatar
Senior Member
Joined: Mar 2016
Posts: 859
Likes: 322
From: Auckland NZ/ Houston, TX
Default

I wasn't referring to where #2 is, I meant the part behind that where it makes a 90 degree turn to the throttle body ( #1 ) , the firewall is on the RH side of the pic, is this correct?
 
Reply
Old May 4, 2017 | 06:03 PM
  #7  
ericjansen's Avatar
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2013
Posts: 3,256
Likes: 1,371
From: Taiwan, R.O.C.
Default

Originally Posted by JBzXJ40
I wasn't referring to where #2 is, I meant the part behind that where it makes a 90 degree turn to the throttle body ( #1 ) , the firewall is on the RH side of the pic, is this correct?
Google is your friend ..

 
Reply
Old May 4, 2017 | 06:04 PM
  #8  
Kejar7's Avatar
Thread Starter
|
Member
Joined: May 2017
Posts: 55
Likes: 7
From: Alberta Beach, Alberta
Default

Hi
Yup I misread that. Yes that's the area in question.
 
Reply
Old May 4, 2017 | 06:36 PM
  #9  
JBzXJ40's Avatar
Senior Member
Joined: Mar 2016
Posts: 859
Likes: 322
From: Auckland NZ/ Houston, TX
Default

Yeah in the pic that ericjansen posted, that straight piece coming off, its a silencer, doesn't add or take away any performance, unless its cracked and starts a vacuum leak, which I've seen happen quite often in the past. Thanks for posting the picture ericjansen.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:49 PM.