Hi all
I need a new cable for my XJ Series 3 V12 1984.
The cable runs from the right inner wing to ignition, kick down switch, oil temperature, oil pressure gauge, maybe to the generator and it runs down to the automatic transmission.
I have contact with British Wirering but unsuccessfully.
Can anyone help - where do I get a new or a used in a good shape?
Soren Post
Denmark.

 

I have always made my own, with loom connectors that were readily available down here, and totally different to the originals.

Kind of messy if electrical work is not your preference.

I doubt you will find one in "good" shape, either S3 or XJS (same), as age is against any wiring now.

 

If you can't find those multi-bullet connections you can always make-up individual bullet connectors, no harm done.

britishwiring should have everything you need to replicate the harness down to the write wire and tracer color.

 

I just got a tub full of XJ-S V12 ignition parts, like relays, wiring, ECU's, stuff I cannot identify.

I will look to see if I have any harness similar to what you are showing.