When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does the x350 seat work in our x308s without much fussing around? XJR Seats, or possibly even just the lower section of the x350 fit to our upper x308? My drivers side bottom is ripped from the previous owner. I'd like to restore but there are no XJR x308 seats on ebay. They are all x350!
The mounting brackets are different, I'm not sure about the spacing but I believe it's very difficult to make it work. You would also need to consider the side airbag's compatibility, and the seat module connections to make it work correctly. I'm not sure how different those are on the x350.
The mounting brackets are different, I'm not sure about the spacing but I believe it's very difficult to make it work. You would also need to consider the side airbag's compatibility, and the seat module connections to make it work correctly. I'm not sure how different those are on the x350.
If the brackets were different thats not too much of a bother to make work, however the electrical connector/circuit compatibility could be