replaing Stereos
Thread Starter
|
Senior Member
Joined: Mar 2016
Posts: 103
Likes: 13
From: pa
replaing Stereos
hey guys i am buying a 1986-1996 xjs V12 and would like to pull out the old Stereo and put in a new system. i am looking at 7" flep out screen 1Din HD Capacitive Android 4.4.4 Car DVD Player GPS WiFi 3G system will this fit and how much work will it be.if this system will not fit can you help me find on that will fit
Veteran Member
Joined: Jul 2010
Posts: 1,124
Likes: 368
From: Southern California
Sounds like you'll be getting all the bells and whistles for the ICE in your upcoming kitty; good for you, man. Myself, I've done similar, only that it was quite a while ago, so the technology is obviously not there, except for high capacity digital storage and digital sound processing (see my gallery for what I did on mine). And a 7" display is still in the works for me.
The radio mounting surface on the XJS dash is not even with the surface above it (where the trip computer is) in a way that when a flip screen goes up it will hit the trim above it before it is vertical, so it will be facing down, which obviously you do not want. However, a member here did this install with a special frame trim piece that forces the radio to move outwards, maybe 1/4" or 3/8" not sure, thus giving the screen a pivoting point that's closer to the trim above it, therefore to reach vertical before hitting. His picture shows the screen fairly vertical. Of course, the screen facing a little upwards, towards the passengers faces is even more preferable.
I have not been able to find this, or a similar, trim piece yet myself, but maybe the member will pitch in here since pics of his install will be displayed (can't remember his name). Anyway, see pics below.
Cheers,
The radio mounting surface on the XJS dash is not even with the surface above it (where the trip computer is) in a way that when a flip screen goes up it will hit the trim above it before it is vertical, so it will be facing down, which obviously you do not want. However, a member here did this install with a special frame trim piece that forces the radio to move outwards, maybe 1/4" or 3/8" not sure, thus giving the screen a pivoting point that's closer to the trim above it, therefore to reach vertical before hitting. His picture shows the screen fairly vertical. Of course, the screen facing a little upwards, towards the passengers faces is even more preferable.
I have not been able to find this, or a similar, trim piece yet myself, but maybe the member will pitch in here since pics of his install will be displayed (can't remember his name). Anyway, see pics below.
Cheers,
Veteran Member
Joined: Jul 2010
Posts: 1,124
Likes: 368
From: Southern California
OK, the member I was referring to is SARC and those pics are from his XJS, although they don't show the two gorgeous gauges that he later added on the center console to the left of the shifter.
Cheers,
Cheers,
Senior Member
Joined: Jul 2010
Posts: 257
Likes: 105
From: Rugby
Reinaldo,
Sarc's install is here: https://www.jaguarforums.com/forum/x...ndering-91652/
This isn't his car, which is a shame as I was also going to try and find out about that moulding. I also have a flip screen Alpine waiting to go in!
Rich
Sarc's install is here: https://www.jaguarforums.com/forum/x...ndering-91652/
This isn't his car, which is a shame as I was also going to try and find out about that moulding. I also have a flip screen Alpine waiting to go in!
Rich
Thread
Thread Starter
Forum
Replies
Last Post
wannajag
XF and XFR ( X250 )
29
Aug 22, 2012 09:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)