So while I was pulling the inner fender off and finding the broken subframe bolt, I decided to undo the caliper and clean up the brake pads etc.. ( cuz they are red stuff pads hehe )
I noticed the inner pad had the groove filled in with stuff. I cleaned that out.
Then i noticed the cross drilled holed in the disc were completely full of stuff on the inner side of the disc only. I cleaned them all out.

Any chance that these holed filled with (brake dust plus winter filth?) might have been causing the bearing like sound? I cant test now untilI get a new subframe bolt.

I was wondering if the bearings could possibly be defective on the car - unlikely because I just changed both front knuckles 2 months ago. If i conquor the rattles and the groaning... I might finally get to the first day of this thing driving the way it should..

Just the messed up trip computer reading and outside temp left after this...