X-Type ( X400 ) 2001 - 2009
Sponsored by:
Sponsored by:

Need to connect cigarette lighter wires

Thread Tools
 
Search this Thread
 
  #1  
Old 07-25-2011, 05:47 AM
matthewstuart's Avatar
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Banbury
Posts: 5
Received 0 Likes on 0 Posts
Default Need to connect cigarette lighter wires

Hi all, I have taken my car to an audio specialist, but unfortunately we fell out over poor service, and I have received my car back with the centre console in bits!

I've put everything back together, apart from the cigarette lighter. I have three wires, and three connectors on the back of the lighter to fit the wires to, however, I don't know where each wire is meant to go. The wires are:

One orange with an orange connector;
One orange with a blue connector;
One black wire with connector missing!

The lighter connection points are:

One in the middle of the lighter (live I think);
One to the side of the lighter (neutral I think);
One to the night light/illuminator of the lighter.

Can somebody please advise which wire goes to which connector. I've rang jaguar for help, but they aren't prepared to help over the phone, and I have to drive 30 miles to my nearest dealer, pay them £45 + VAT to do something I am fully able to do myself, but only if I knew what went where though!

Thanks in advance.

Mat
 
  #2  
Old 07-25-2011, 05:50 AM
matthewstuart's Avatar
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Banbury
Posts: 5
Received 0 Likes on 0 Posts
Default

Sorry, I forgot to say it's an '05 X-Type sport saloon if that has any bearing on the wiring loom.

Thanks.
 
  #3  
Old 07-25-2011, 04:19 PM
Razkid's Avatar
Senior Member
Join Date: Nov 2010
Location: USA
Posts: 106
Received 40 Likes on 18 Posts
Default

You could buy a cheap test light. Connect the wire lead to a good ground point and with the key in the On position, probe each connector. The connector that lights the test light is the one that goes to the center terminal on the lighter. Next, turn the lights on and probe the other two connectors. The one that lights up the test light will go to the night light terminal. The third wire goes to the lighter shell terminal.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Forcedair1
XJ XJ8 / XJR ( X308 )
37
05-14-2023 03:28 PM
mbergen
XJS ( X27 )
7
10-23-2019 10:26 PM
HypnoGuru
XJS ( X27 )
11
10-23-2018 09:53 AM
jagent
XJ6 & XJ12 Series I, II & III
10
09-12-2015 01:40 AM
YycXJS
XJS ( X27 )
2
09-07-2015 09:58 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Need to connect cigarette lighter wires



All times are GMT -5. The time now is 04:02 PM.