Hi
Symptoms: Seems turbo does not kick in. Engine starts and ticks over fine but when accelerating will only pulls slowly. Can go through gears and get up to speed slowly but does not like inclines.
I noticed that when start the car and look at the actuator it goes backwards and forwards once but when you press the accelerator and rev it it does not move at all. I assume that when it first starts up it runs a calibration cycle then goes back to a resting position and must wait for other command from elsewhere.
Any ideas where to start fault finding? Baz

 

’m having a similar problem with my partners 2.0 D 😟 im looking at getting the actuator tested her car runs but then the glow plug light comes on and goes into limp mode

 

SEARCH this forum for "Mr. Muscle" fix. Also @ Bstorm, when posting it's helpful to put info of what you have =, diesel, petrol, engine size, transmission, etc. to help members assess possible solutions. You can also go to your profile and include the information in your "signature" as you will note in my reply.