Project 3M Di-Noc Interior Carbon Fiber
#1
Project 3M Di-Noc Interior Carbon Fiber
So I just ordered 4 square feet of Di-NOC for about $25 shipped. Looking to cover every wood piece. Need to figure out what to do with the shift knob still. I plan to take lots of pics and provide detailed explanations of what I do. Good news is that its easily reversible if I hate it.
Edit - adding finished product to OP:
Edit - adding finished product to OP:
Last edited by exexpat; 12-11-2010 at 11:52 PM.
#2
Will be very cool if the install is done with great detail and time consumption! (it's you, so I assume it will be fine LOL)
I recently added a black gloss kit to my black and carbon fiber interior, and i LOVE it! There are pix of it in my 'Garage' section of my User CP if you'd care to peruse and either insult or applaud
Oh, I also have an S-Type 'R' shift knob in mine, would definitely have continuity with your sportier theme...
I recently added a black gloss kit to my black and carbon fiber interior, and i LOVE it! There are pix of it in my 'Garage' section of my User CP if you'd care to peruse and either insult or applaud
Oh, I also have an S-Type 'R' shift knob in mine, would definitely have continuity with your sportier theme...
#3
Will be very cool if the install is done with great detail and time consumption! (it's you, so I assume it will be fine LOL)
I recently added a black gloss kit to my black and carbon fiber interior, and i LOVE it! There are pix of it in my 'Garage' section of my User CP if you'd care to peruse and either insult or applaud
Oh, I also have an S-Type 'R' shift knob in mine, would definitely have continuity with your sportier theme...
I recently added a black gloss kit to my black and carbon fiber interior, and i LOVE it! There are pix of it in my 'Garage' section of my User CP if you'd care to peruse and either insult or applaud
Oh, I also have an S-Type 'R' shift knob in mine, would definitely have continuity with your sportier theme...
#6
#7
Trending Topics
#9
#10
#12
#16
So the mod ninja came out again tonight. Started at about 9:30pm and finished at 12:30am. The nice part was the main bezel pulls straight off. Everything looks factory-applied and the black is ominous and vaderish, but nice and theme appropriate. Shift knob should be here Monday or Tuesday, but I covered the wood one with Di-NOC for the hell of it (took about 30 minutes just for that experiment).
Here it is before:
Bezel pulled out. You need a Torx T25 to pull the vents from it. I'm thinking about XJ vent analog clock mod...
After. I started with the airbag and did that still on the dash. Used a paper hole punch to make a perfectly little round hole to view the airbag indicator light.
Here is one of the four door panels. Did these without removing them.
So this takes some patience, a heat gun, razer blade, credit card or similar to press film into gaps, a picking tool to scrape little pieces of cut vinly out of gaps, small screwdriver and good lighting. This film is mega thick and order at least 6 feet of it. I eeked by on 4 feet, but I had to get creative in the end.
Aside from crappy pics, what do you think? Keep or remove?
Here it is before:
Bezel pulled out. You need a Torx T25 to pull the vents from it. I'm thinking about XJ vent analog clock mod...
After. I started with the airbag and did that still on the dash. Used a paper hole punch to make a perfectly little round hole to view the airbag indicator light.
Here is one of the four door panels. Did these without removing them.
So this takes some patience, a heat gun, razer blade, credit card or similar to press film into gaps, a picking tool to scrape little pieces of cut vinly out of gaps, small screwdriver and good lighting. This film is mega thick and order at least 6 feet of it. I eeked by on 4 feet, but I had to get creative in the end.
Aside from crappy pics, what do you think? Keep or remove?
#18
Now thats a clean mod. I like it. For not removing the side panels, It looks just as clean if your were to take them off and wrap A+ Job bro.
Did you contemplate wrapping the screen's housing/climate control housing? I think if you did those it might (might) be carbon overkill.
Daytime Pics coming ? That will be the icing on the cake.
My Vote is to Keep
The Nocturnal Ninja keeps it clean.
- Dave
Did you contemplate wrapping the screen's housing/climate control housing? I think if you did those it might (might) be carbon overkill.
Daytime Pics coming ? That will be the icing on the cake.
My Vote is to Keep
The Nocturnal Ninja keeps it clean.
- Dave