side mouldings loose
#1
10-15-2008, 12:05 AM
Guest
Posts: n/a
side mouldings loose
Hey guys,
So my dumba** took a left turn over a curb yesterday and now the back part of the side moulding under the driversside doorshas come off and is loose. I was looking at it today and couldnt figure out how to put it back in place temporarily. So my question is does anyone have any advice on how to put the moulding back in place.
So my dumba** took a left turn over a curb yesterday and now the back part of the side moulding under the driversside doorshas come off and is loose. I was looking at it today and couldnt figure out how to put it back in place temporarily. So my question is does anyone have any advice on how to put the moulding back in place.
#2
10-15-2008, 03:23 AM
Senior Member
RE: side mouldings loose
Shortly after buying our 2003 last year while cleaning it I sat on the sill of the rear drivers side door and put to much weight on the lower trim piece and dislodged the clips holding it. I put it back in place using some double stick exterior tape I had and the trim is still holding in place after several times through the car wash plus winter driving. The tape I use was bought at Walmart in the tape section of the paint dept.
Bob N
Bob N
#7
10-15-2008, 08:08 PM
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
99xk8guy
XK8 / XKR ( X100 )
11
06-05-2023 06:28 AM
aholbro1
XJ XJ6 / XJR6 ( X300 )
17
08-05-2021 05:02 AM
wvanepps
F-Type ( X152 )
16
10-04-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)