Hi
this is my first post here and I joined after recommendation of one of the members in UK forum. It’s a long story but My car had a rod knock and turned out to be only one big end rod bearing spun. I think it is beyond the stage that could be sanded so I am going to take the crank out for regrinding. But I am stuck because I couldn’t find torque settings for 3.0D engines. Slightly smaller version of this engine was used even in a S type 2.7D but I could not find anything about disassembly and assembly of them. All workshop manual I found for XF, S-type, XJ and Discoveries are missing that section for this engine. I can find it for 2, 2.2 and 2.5 Puma engines but not for Lion V6.

I would greatly appreciate any help to find the settings.

Cheers

 

You are unlikely to get the info you want on this forum as no diesel Jag was ever sold in North America.

 

There were no replies on the UK forum, so it was worthwhile getting the question out there as this site has a global audience.

 

Welcome to the forum Robinus,

I have the Jaguar Workshop Manual for the X250 3.0D but it does not include torque settings for the crankshaft mains or con rods. The engine procedures are limited to top end for which it does give the relevant torque settings. The only botton end procedures detailed are oil pan and oil pump removal/replacement.

There may be a printed Engine Repair Manual but technical information for recent models is generally all on Jaguar TOPIx.
https://topix.jaguar.jlrext.com/topi...cle/lookupForm

Access is by account (individuals can register) and subscription but you could easily downlaod the required information within a one hour time purchase.

Graham

 

Thanks Graham. It's not actually me that wants the info, I just suggested posting here as no replies on the UK site.

 

I could finally find them. If any one needs it PM me. Just finished my engine rebuild! Car is running! Couldn’t believe I will finish it ever. I changed one con rod, all bearings and turned crankshaft whiteout pulling the engine block mainly because I was single handed.

 

Glad to hear you got it done.

 

Hello Hamedhbb.
How could I contact you to send me the tightening torques for the cod rod and crankshaft?
sorry my english, it's from google
Thanks

 

Hi mate, for some reason I can't send you a massage, could you send me those please, trying to rebuild my uncle XF 3.0 tdi engine and I'm stuck on crankshaft. Cheers mate 👍

 

Can't PM you as you've chosen not to receive messages or you're not allowed to receive them. Get it sorted out & PM me an email to send the settings to.

 

I went through all settings everything seems to be fine, anyway could you send it to my email dk87bills@gmail.com it's my alt email so I don't care if it gets hacked as I posted it here 🙃

 

Email sent.

 

You can edit out your email now.

 

Perhaps it would be best if he would post all those numbers here on the forum where everyone can see them?
Might be more useful that way?
.
.
.

 

I've removed several posts by new members requesting information to be sent directly to them by PM or eMail.

We're not running a DATING website here - it's a FORUM. The idea is we exchange ideas and information openly in posts for the benefit of all.

If you'd taken the trouble to read the GUIDANCE in the link beneath my signature, you would know:
1. exactly why you cannot exchange PM's.
2. how to add large files to forum online storage

If you wish to contribute with either issues or resolutions in posts on the forum, you are welcome. If you wish to proceed in a private contact group, please go elsewhere.

Graham

 

Please can you post the torque settings for the 2012 Jaguar XF 2.2 diesel here for the main bearing caps?

 

yeah I’d really appreciate it also even a picture stating the torque sequence for mains and con rod caps

 

It’s 37.7mb file including instructions and torques. I don’t have public space to share the link here. I can sent it using wetransfer to everyones email.

 

I’ve sent you a pm but I’m pretty sure the mod is onto me lol said something about this not being a dating site 😂. He or she has jokes but the jag I need to fix remains broken until I can get hold of these main bearing cap torques

 

https://we.tl/t-Asnfs12ggL

download it.link will expire