Important information from CTEK
#1
#2
#4
Last edited by Stuart S; 02-15-2019 at 09:42 AM.
#5
Hi Robert,
All I know about voltage is that I plug one end of my CTEK MUS4.3 into a 120 volt US household socket and plug the other end into the little CTEK connector socket that's part of the wire that's attached to my 12 volt AGM battery. The magic CTEK box takes care of everything else.
I now set my CTEK MUS4.3 to normal (car icon) for the primary battery and small (motorbike) for the auxiliary stop-start battery.
https://smartercharger.com/collectio...est-and-charge
Stuart
All I know about voltage is that I plug one end of my CTEK MUS4.3 into a 120 volt US household socket and plug the other end into the little CTEK connector socket that's part of the wire that's attached to my 12 volt AGM battery. The magic CTEK box takes care of everything else.
I now set my CTEK MUS4.3 to normal (car icon) for the primary battery and small (motorbike) for the auxiliary stop-start battery.
https://smartercharger.com/collectio...est-and-charge
Stuart
Last edited by Stuart S; 02-15-2019 at 12:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)