V12 Bolt Pattern

Reply Subscribe

Thread Tools

Search this Thread

Mar 22, 2018 | 06:37 AM

stevenx605

Thread Starter

Junior Member

Joined: Dec 2013

Posts: 28

Likes: 39

From: Lower Catskill Mtns

V12 Bolt Pattern

Hi,
Does anybody have the bolt pattern, dowel to crankshaft centerline specs to make an adaptor for 1996 X305 6.0L engine. Any help would be greatly appreciated . Steve

Mar 22, 2018 | 12:38 PM

olivermarks

Senior Member

Joined: Jan 2018

Posts: 805

Likes: 332

From: sebastopol CA

Is this for a gearbox/ clutch housing? I don't have dimensions but interested in topic...I believe ICSAmerica on this forum may know more...

Mar 23, 2018 | 03:36 AM

stevenx605

Thread Starter

Junior Member

Joined: Dec 2013

Posts: 28

Likes: 39

From: Lower Catskill Mtns

Hi,
Thank you for the reply, I will contact ICS. The project is for a mid engine layout to ZF trans. These bolt patterns seem to be top secret ! ! Thanks Steve

Mar 23, 2018 | 10:35 AM

olivermarks

Senior Member

Joined: Jan 2018

Posts: 805

Likes: 332

From: sebastopol CA

Quote:

Originally Posted by stevenx605

Hi,
Thank you for the reply, I will contact ICS. The project is for a mid engine layout to ZF trans. These bolt patterns seem to be top secret ! ! Thanks Steve

That sounds interesting! I'm hoping to insert an x305 6.0 into a 76 xjc and am aiming to install a manual box so will be interested to hear how your project goes...

Mar 23, 2018 | 04:49 PM

Lady Penelope

Veteran Member

Joined: Apr 2017

Posts: 4,039

Likes: 1,397

From: Kansas City USA

There is some twinking involved with the ECU to swap over to manual . XJRengineer has the experince on that . There is a different manufacturer on the AJ16 and V12 engines for the X300 series ECU's.

Last edited by Lady Penelope; Mar 23, 2018 at 04:55 PM.