Hi,

After reading different information about the twinscrew supercharger, I took the dicision to make my own kit....

I already have a friend, a CNC engineer to help me and a way to get a twinscrew supercharger.


If anyboy here can give me some good advise, please leave a post here.

 

Thanks for reminding me, I need to step up my own plans ;-)

Good luck!

 

The only 'good advice' I can give is contact the member above, Avos is the resident T/S expert for Jaguar V8's......he has already produced a kit that's been around a while and on a number of very quick cars. Save yourself a lot of engineering heartache!

 

I know Avos already made a set for the older type,

maybe he and I could join forces, if he likes that.

I also know that avos lives nearby...... well in any case my set will be ready at the end of the year...

 

If memory serves me correctly, Avos, you are still in the process of "plumbing the elbow", correct? Perhaps you two should feverishly work independently to complete a sorted-out kit for the X350 XJR, and by then I'll be able to afford the silly money that will be necessary to buy-in!

 

We are mailing, lets see what comes out of it, but I am determined to at least put effort in it to make one.