hello every one,

got a another ?

did engine compression test and 6-5 cyc psi is 30/28 the rest are around 140 drie test,

when we did a wet test on all cylinders was 180-190 across the engine

so im going to replace the rings,rod bearings,head gasket kit, timing chain and hone the cylinders,

but is there a way to do this with out pulling the motor, or droping the front suspension?

if not which is quicker\easyer

first time do this on a jag

 

fixed it ,

spent a week swaping out the motor for one with 25000 miles on it,

found it on ebay for sale in okc about 1 1/2 from me so i bought it for $400 cheaper than swaping headgasket, but a lot more pain never doing that again

but it runs like a champ

p.s unbolting the trans is a pain took 2 hours just get the trans unbolted from the motor, then 3 hours just to get it bolted back up