front bumper boo boo
#1
front bumper boo boo
I have a 1995 XJ6. I ran into the back of another car, of course its not my fault. I will never cop to it., How many people stop act a stopsign, take off and stop on the other side, lol But I want to pull my front bumper off and see what is bent. The bumper cover has shifted to the passenger side abot 2" and the left side has dropped about 2"I don't see where to start. Hope someone can let me know
Thanks Tom
Thanks Tom
Last edited by 19jag95; 08-30-2014 at 06:22 PM. Reason: did not make sense
#2
1st post from Tom. I know you're not a new member, but welcome to the forum. If you could pop over to the new members area and introduce yourself.
I've moved your post from the General Tech section to the X300 section, this is the model of your XJ6.
I'm sure some members familiar with the X300 will be along shortly with some advice on how to remove the front bumper.
I've moved your post from the General Tech section to the X300 section, this is the model of your XJ6.
I'm sure some members familiar with the X300 will be along shortly with some advice on how to remove the front bumper.
The following users liked this post:
19jag95 (08-30-2014)
#3
#4
front bumper boo boo
So would it be safe to assume that I bent the bumper shocks. The bumper is pushed over to the passenger side close to 2" and down on the drivers side about 2". The reason I ask that is because I don't really want to pull the bumper off and not be able to get it back on because it is tweeked. I have access to a set of bumper shocks for $30. So would that be the most likely problem
Last edited by 19jag95; 08-31-2014 at 07:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Marque
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
1
09-14-2015 11:17 AM
adam699
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
6
09-12-2015 05:32 PM
1964Daimler
MKI / MKII S type 240 340 & Daimler
0
09-09-2015 11:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)