Hi All

Please see attached the sunroof drain channel 3D model for printing new parts.

This is a really quick one, I need to state a few things.

* This is not my model
*I have not installed or tested this part.
* I Found it on Grab CAD today and I Thank the person who modelled this and made it publicly available.
*I am simply re sharing someone else work that was already on the internet.

I have asked work to print me a set so i can drop my headlining and test them out.

I hope this helps as several people have modelled and printed this part but they still are not easily available. My parts from work are being printed on a commercial HP Fusion 5200 from PA-11 Nylon

I will post my experience as i learn more about it, this is the image from the author Théo LAURENT on GRABCAD

 

Excellent, thank you. Eager to see your results!

 

Is it the left or right side drain support channel? Or are they symmetrical?

 

It’s the left side , but you just tell your 3d print shop to mirror it / or mirror it yourself in Fusion 360 Cad software .

 

I'm very pleased to report that I have successfully installed and tested the prints, they worked perfectly first up.

 

I just found a few of these original parts at our Jaguar shop and put the part number in on google and found this post. Thank you so much for sharing, we will definitely keep this in mind for future sun roof repairs!