codes
p1000
p0750
p1797

thanks

 

P1000 is flagged after DTCs have been cleared, all SIX (6) engine management OBD diagnostic monitor drive cycles HAVE NOT BEEN COMPLETED.

I didn't find a listing for p0750

p1797 is flagged when ALL CAN ECM messages are corrupted or missing.
Check CAN wiring TCM to ECM for an open
Check CAN wiring for a short
or
ECM failure.

 

The CAN bus is PROBABLy an artifact of connecting your scanner. As pingj said, P1000 simply means you reset and have not completed the test cycle. P0750 is a shift solenoid fault. So , do you have any symptoms? BTW, you can find Jag code a number of places with google

 

well when i put the vehicle in drive it doesnt do anything wont move
rpms dont do anything
so it aint the transmission thats the problem or???

 

shift solenoid fault -> transmission won't shift from park... coincidence?

BTW, you've already received advice on the RPMS being computer limited to 3000 on XJRs while in park or neutral, that's why they won't move.

 

well im in the processe of taking out the transmission
where can i get a transmission valve drive mine had cut wires