94 xj6 wiper motor doesn't work at all
new problemhas started. my wiper motor doesn't work at all.I've checked all three fuses and chaged them out for new even though were good. then disconnected wiper motor from harness and have no power on any speed. I found a module behind driver headlight DBC11206 and has that for wiper and a timer for interior lights. the timer works but no wiper. Is this module common to just blow out? last time drove car in rain delay worked fine in a light mist then other day in the fog no wiper at all.These electrical problems are troublesome but gotta love the car. Any suggestions would be appreciated.
jimbo94:
I have no personal experience with this one, but my first reaction was to check whatever relay is responsible for the wipers. So, I think I would be sniffing around that relay module as well… Hope others smarter than me will chime in.
On a different note we live very close to each other. Your '94 doesn't happen to be a light green VDP, does it?

Scott
I have no personal experience with this one, but my first reaction was to check whatever relay is responsible for the wipers. So, I think I would be sniffing around that relay module as well… Hope others smarter than me will chime in.
On a different note we live very close to each other. Your '94 doesn't happen to be a light green VDP, does it?

Scott
No mine is the maroon 94 xj6 small dent left front by front headlight . If around reedsburg during the week you will see it at my work unless on the harley. Thanks for the input. where you from?
That was problem. Had to tear apart plug in harness 2 connections very corroded and 1 connection broke clean off. Soldered the connections and all works.Hope this might help others out there. Are thesecars prone to corrison and why?
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: GenRad GDS-510 scan tool
johnnie ryall
PRIVATE For Sale / Trade or Buy Classifieds
6
Oct 19, 2015 09:44 PM
SingBlueSilver
XJ6 & XJ12 Series I, II & III
6
Aug 27, 2015 02:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



