Leaper mounting advice...
#1
#2
Cindy,
Go here:
https://www.jaguarforums.com/forum/x...-112800/page4/
Scroll down the page almost to the bottom and you'll see a post with pics of the leaper in it. Click on the pics to enlarge.
Don't let the title of the thread throw you.
There should be no need to remove the bonnet. Once you start to mount the leaper, be very careful not to over tighten the nuts on the underside, to much tension will cause a dimple effect (dent) on the top side.... totally ruining your day.
Go here:
https://www.jaguarforums.com/forum/x...-112800/page4/
Scroll down the page almost to the bottom and you'll see a post with pics of the leaper in it. Click on the pics to enlarge.
Don't let the title of the thread throw you.
There should be no need to remove the bonnet. Once you start to mount the leaper, be very careful not to over tighten the nuts on the underside, to much tension will cause a dimple effect (dent) on the top side.... totally ruining your day.
Last edited by Rob Evenson; 06-01-2014 at 07:43 PM.
#3
#4
The following 5 users liked this post by Cinny65:
93SB (07-11-2014),
Don B (07-08-2014),
Kay (06-09-2014),
Lawrence (06-08-2014),
Rob Evenson (06-08-2014)
#5
The following users liked this post:
Cinny65 (06-08-2014)
#7
Trending Topics
#8
#9
Got It....
I bought a 3ft section of prethreaded ReadiRod, We saw from your photos how to do it...thank you. No bonnet removal needed.
The rod was only $1.00, money well spent! Jimmy's frustration at realizing the screws were too short - priceless.
We will be adding photos when we finally get the darn thing mounted. It will be on for the Qualicum Beach Show'N Shine this Sunday (Father's Day).
The rod was only $1.00, money well spent! Jimmy's frustration at realizing the screws were too short - priceless.
We will be adding photos when we finally get the darn thing mounted. It will be on for the Qualicum Beach Show'N Shine this Sunday (Father's Day).
#10
What's the word???
Do we have a mounted leaper yet?
Do we have a mounted leaper yet?
I bought a 3ft section of prethreaded ReadiRod, We saw from your photos how to do it...thank you. No bonnet removal needed.
The rod was only $1.00, money well spent! Jimmy's frustration at realizing the screws were too short - priceless.
We will be adding photos when we finally get the darn thing mounted. It will be on for the Qualicum Beach Show'N Shine this Sunday (Father's Day).
The rod was only $1.00, money well spent! Jimmy's frustration at realizing the screws were too short - priceless.
We will be adding photos when we finally get the darn thing mounted. It will be on for the Qualicum Beach Show'N Shine this Sunday (Father's Day).
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)