Replacing the front to rear seat adjustment motor
#1
Replacing the front to rear seat adjustment motor
Hi folks,
With help from Bryan N I was able to get the wiring straightened out on my XJ40 front seats. However, on the driver's seat (LH) the motor operating the screw drives to move the seat forward or rearward is not functioning. The good news is that I have a spare seat frame with spare motors.
Clearly it is important that the tracking of the motor on the screws remains perfectly parallel. Rather than just diving in and ripping things apart I wonder if anyone can give me instruction on how to disassemble and install this motor?
This is a photo showing the location of the motor in the seat frame. Any help would be appreciated.
Lin
With help from Bryan N I was able to get the wiring straightened out on my XJ40 front seats. However, on the driver's seat (LH) the motor operating the screw drives to move the seat forward or rearward is not functioning. The good news is that I have a spare seat frame with spare motors.
Clearly it is important that the tracking of the motor on the screws remains perfectly parallel. Rather than just diving in and ripping things apart I wonder if anyone can give me instruction on how to disassemble and install this motor?
This is a photo showing the location of the motor in the seat frame. Any help would be appreciated.
Lin
Last edited by Don B; 12-14-2014 at 12:37 AM. Reason: To respect Bryan N's preferred online username
Thread
Thread Starter
Forum
Replies
Last Post
BrentGardner
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
28
04-26-2024 03:08 AM
philwarner
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
13
12-06-2021 07:13 AM
Doberman_Fan
S-Type / S type R Supercharged V8 ( X200 )
22
12-24-2019 06:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)