Torque specifications on cylinder head bolts
Thread Starter
|
Member
Joined: Oct 2013
Posts: 36
Likes: 5
From: Las Vegas
Torque specifications on cylinder head bolts
Hi!
I need help. Im currently doing a head job on my 1997 jaguar xj6 that has a 4.0 engine. I bought new cylinder head bolts but i dont know whats the torque specifications for that. Please help thank you
I need help. Im currently doing a head job on my 1997 jaguar xj6 that has a 4.0 engine. I bought new cylinder head bolts but i dont know whats the torque specifications for that. Please help thank you
Veteran member
Joined: Jun 2010
Posts: 1,444
Likes: 329
From: Wisconsin, United States
Markos:
You'll need to post in the X300 (which is what a '97 XJ6 is called) to be sure. Haynes says for the XJ40 (through '94) 44 foot pounds of torque is required, plus an additional 1/4 (90 degree) turn. Could very well be different for the X300.
Scott
You'll need to post in the X300 (which is what a '97 XJ6 is called) to be sure. Haynes says for the XJ40 (through '94) 44 foot pounds of torque is required, plus an additional 1/4 (90 degree) turn. Could very well be different for the X300.
Scott
Joined: Dec 2009
Posts: 13,684
Likes: 9,630
From: Wise County,TX
You do need to post in the correct forum for proper info.
JTIS recommends 59-61 Nm PLUS 90 degrees rotation (1/4 turn) for the AJ16 engine.
Scott's recommendation is correct for BOTH the AJ6 and AJ16.
bob gauff
JTIS recommends 59-61 Nm PLUS 90 degrees rotation (1/4 turn) for the AJ16 engine.
Scott's recommendation is correct for BOTH the AJ6 and AJ16.
bob gauff
Thread
Thread Starter
Forum
Replies
Last Post
aholbro1
XJ XJ6 / XJR6 ( X300 )
18
Dec 29, 2024 06:46 PM
Dickie_L_J_O
XJ XJ8 / XJR ( X308 )
8
Sep 13, 2015 07:44 AM
al_roethlisberger
XJ XJ6 / XJR6 ( X300 )
7
Sep 11, 2015 10:04 PM
joesoap
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
13
Sep 10, 2015 01:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)