I have been "fine tuning" the Jaguar gear selector cable to GM 700r4 trans on my 86 Xj6 v8 conversion. Making adjustments... It now has a smoother action than it had,... but I am curious if someone has a better way of doing this mod than I do. If anyone happens to have any pictures of the area on the transmission where the JAG cable connects to the GM shifter arm on the trans, I sure would like to see them.
My gear shift selector seems to work better now but there is room for improvement. Anyone?

 

More lost stuff !!!

I have the material I sought. I scanned it. but finding it and getting it on newer is @@##$##$

maybe tomorrow!!!

 

Another effort to attach the drawing of the shifter connection from my Johnscars stuff.

My saved stuff is a jumbled confusion.

Carl

 

Carl you are a prince ! Thanks for posting the drawing of the trans arm to cable set up... precisely what I was looking for. Thanks again .
I was on the right track, I am now in the middle of creating the cable support bracket for the cable. The correct geometry was what I was looking for.
Alyn

 

As an aside, I have all my Jaguar stuff on a dedicated thumb drive and a copy of that on an external hard drive... Helps with organization. Alyn