XJ6 Series 1 Water/Washer bottle Square Type
Hi , wondering if anyone has a spare water bottle that i can buy and cover the potage for please ?
It's the square type that mounts on the battery mounting bracket.
Hoping you can help....John
It's the square type that mounts on the battery mounting bracket.
Hoping you can help....John
Hi John, I can't help you but I have added a couple of pics so if anyone can they know exactly what you are after.
Is the bottle like the one on the red car in the first pic?
The second car(silver) is my series 1 and the bottle is right down the front near the radiator.
Not sure which is correct for a series 1.


EDIT, just looking at my parts book there is a 1st type and 2nd type of washer bottle so your car must be an earlier one. Your expansion tank will be further forward than mine. I assume on the later series 1 cars the expansion tank was moveved further back so it is higher and a smaller washer bottle and bracket fitted between the expansion tank and the radiator.
Both bottles and the later bracket are available on ebay.
1st type part no C28008
2nd type Part no C36736
Bracket Part no C36735
Jaguar Daimler Washer Bottle XJ6 XJ12 SER 1 2 Early SER3 Part NO C36736 | eBay
Jaguar Daimler Windscreen Washer Bottle Bracket Fits XJ6 XJ12 C36735 | eBay



You could call Gary at Jagayre in Melbourne, he was wrecking 2 x S1's last time I was speaking to him
Jagayre - Auto Parts Recyclers - Clayton, VIC - Yellow Pages®
Or Doug at Jagdaim,
Jaguar Spare Parts Supplier - Jagdaim - Australia's Largest Independant
Some S1 parts on Gumtree:
http://www.gumtree.com.au/s-ad/balla...rts/1052414540
http://www.gumtree.com.au/s-ad/pelic...ket/1075306128
Is the bottle like the one on the red car in the first pic?
The second car(silver) is my series 1 and the bottle is right down the front near the radiator.
Not sure which is correct for a series 1.


EDIT, just looking at my parts book there is a 1st type and 2nd type of washer bottle so your car must be an earlier one. Your expansion tank will be further forward than mine. I assume on the later series 1 cars the expansion tank was moveved further back so it is higher and a smaller washer bottle and bracket fitted between the expansion tank and the radiator.
Both bottles and the later bracket are available on ebay.
1st type part no C28008
2nd type Part no C36736
Bracket Part no C36735
Jaguar Daimler Washer Bottle XJ6 XJ12 SER 1 2 Early SER3 Part NO C36736 | eBay
Jaguar Daimler Windscreen Washer Bottle Bracket Fits XJ6 XJ12 C36735 | eBay



You could call Gary at Jagayre in Melbourne, he was wrecking 2 x S1's last time I was speaking to him
Jagayre - Auto Parts Recyclers - Clayton, VIC - Yellow Pages®
Or Doug at Jagdaim,
Jaguar Spare Parts Supplier - Jagdaim - Australia's Largest Independant
Some S1 parts on Gumtree:
http://www.gumtree.com.au/s-ad/balla...rts/1052414540
http://www.gumtree.com.au/s-ad/pelic...ket/1075306128
Last edited by o1xjr; May 25, 2015 at 06:49 AM.
Brilliant work guys,
Thank you both for the quick responses.
I can confirm its the same location as the one in the "red" photo, however the difference is that mine has the large screw type lid instead of a cap, as shown in the drawing below.
I'll try those leads and see how I go.
John
Thank you both for the quick responses.
I can confirm its the same location as the one in the "red" photo, however the difference is that mine has the large screw type lid instead of a cap, as shown in the drawing below.
I'll try those leads and see how I go.
John
Thread
Thread Starter
Forum
Replies
Last Post
stanjag
S-Type / S type R Supercharged V8 ( X200 )
4
Dec 29, 2024 08:26 PM
SingBlueSilver
XJ6 & XJ12 Series I, II & III
6
Aug 27, 2015 02:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




