XJS 1989 ABS Blink test
Thread Starter
|
Junior Member
Joined: Jan 2015
Posts: 17
Likes: 0
From: Kidderminster
XJS 1989 ABS Blink test
I managed to carry out the blink test on my 1989 XJS, The error code which came up was 2.1 which is the main master cylinder Valve Failure. I am not sure how to proceed from here - advice please.
Veteran Member
Joined: Apr 2014
Posts: 4,580
Likes: 3,528
From: Kent, UK
maccasa,
Have you driven the vehicle over 19mph to try and clear the fault?
If so, start by looking at the various circuit connection problems as described in the fault code diagnosis doc.
Cheers
Paul
Have you driven the vehicle over 19mph to try and clear the fault?
If so, start by looking at the various circuit connection problems as described in the fault code diagnosis doc.
Cheers
Paul
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)