Hello all, I sold my xkr 2010, and it was touching here when i eneter the house, and i was wandering how can I find out the heights measurement, from road to chassis (front) , of the xkr ,to compare it with a next car I maybe buying soon, I would like to compare the xkr 2010 and a db9 2007. Any infos will really be appreciated.

 

From the workshop manual:

 

Where in the Chassis are you measuring to for 15.43", just curious as I usually measure to the pinch welds behind the front wheels and in front of the rear wheels. Measuring on the actual body can produce mixed results due to fitment.

 

I ain't measuring, I'm quoting the workshop manual. Too lazy to actually go & measure (and mine's got the Dynamic pack, so it's lower anyway)

 

LOL I just wonder where the measurement is taken from

 

OK, this is a bit bonkers:

Durrrrr, wot? So, it appears that "ride height" has nothing to do with ground clearance.

 

LOL someone needed some coffee when they wrote that manual

 

And it's not a mistake; they even give you a picture:

 

So, sorry, jagxk2008, the measurements I gave you are not what you need. I did some googling, and found this:

GROUND CLEARANCE: 3.9", 99 mm

However, the same source gives the same clearance for an XK, which seems wrong. I've also found it quoted as 100mm. As I said, I can't just measure mine, because mine is not standard.

 

Ngaraa and all thanks a lot. so its 100mm.

good .

 

Yes - it's 100mm (dimension 5 below) for the 2010MY:



VW (Gross Vehicle Weight) = the maximum permissible weight of the vehicle, including all passengers and load.

Graham

 

thank you again, the db9 2008 is 119 mm in case some are interested to know.