XK8 / XKR ( X100 ) 1996 - 2006
Sponsored by:
Sponsored by:

1997 XK8 codes and restricted performance - RESOLVED

Thread Tools
 
Search this Thread
 
  #1  
Old 05-23-2017, 05:50 PM
charliepace's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Blue Ridge, TX
Posts: 157
Received 14 Likes on 14 Posts
Default 1997 XK8 codes and restricted performance - RESOLVED

Three weeks ago I cleaned the engine compartment with S100 and a light water spray the next day I got a check engine light and rough idle. I suspected something was wet so after a week or so I cleared codes and restarted and in a few minutes got the ce light and restricted performance message again.

Codes are P0306 cylinder 6 misfire
P1314 bank2 cat malfunction
P1316 injector problem

The car is 1997 XK8 58000 miles don't know if the plugs have ever been replaced, I'm not sure what to do, I know you guys can help.

Thanks for being here.
 

Last edited by GGG; 05-31-2017 at 05:14 PM. Reason: Add 'RESOLVED' to thread title
  #2  
Old 05-23-2017, 06:06 PM
taxman's Avatar
Senior Member
Join Date: May 2017
Location: Columbus, Ohio
Posts: 107
Received 31 Likes on 19 Posts
Default

Same thing happened to me once, water got down behind the cover of the coils/plugs. Water had pooled down at the base of the tube that the spark plug and coil pack sits. Turns out that the water can't evaporate off down in that tube.
 
  #3  
Old 05-23-2017, 06:18 PM
charliepace's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Blue Ridge, TX
Posts: 157
Received 14 Likes on 14 Posts
Default

Thank you Sir.

I will start there and report back.
 
  #4  
Old 05-24-2017, 06:59 AM
JagV8's Avatar
Veteran Member
Join Date: May 2009
Location: Yorkshire, England
Posts: 26,645
Received 4,484 Likes on 3,902 Posts
Default

Originally Posted by charliepace
Three weeks ago I cleaned the engine compartment with S100 and a light water spray the next day I got a check engine light and rough idle. I suspected something was wet so after a week or so I cleared codes and restarted and in a few minutes got the ce light and restricted performance message again.

Codes are P0306 cylinder 6 misfire
P1314 bank2 cat malfunction
P1316 injector problem

The car is 1997 XK8 58000 miles don't know if the plugs have ever been replaced, I'm not sure what to do, I know you guys can help.

Thanks for being here.
Worth checking the free downloads but to me P1314 and P1316 are not those meanings. They are misfires so bad they're damaging the cats so do not drive till you fix the fault(s).
 
  #5  
Old 05-24-2017, 08:37 AM
JimmyL's Avatar
Veteran Member
Join Date: Oct 2008
Location: Virginia Beach, VA
Posts: 1,770
Received 402 Likes on 299 Posts
  #6  
Old 05-24-2017, 08:42 AM
JimmyL's Avatar
Veteran Member
Join Date: Oct 2008
Location: Virginia Beach, VA
Posts: 1,770
Received 402 Likes on 299 Posts
Default

Oops, this post was on another forum. Might relate though.
 
  #7  
Old 05-31-2017, 03:37 PM
charliepace's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Blue Ridge, TX
Posts: 157
Received 14 Likes on 14 Posts
Default

All is well the plugs had water around them. I replaced the plugs and problem solved.

Thanks again for the heip
 
The following users liked this post:
GGG (05-31-2017)
  #8  
Old 05-31-2017, 05:16 PM
GGG's Avatar
GGG
GGG is offline
Join Date: Dec 2011
Location: Durham, UK
Posts: 120,446
Received 16,798 Likes on 12,167 Posts
Default

Originally Posted by charliepace
All is well the plugs had water around them. I replaced the plugs and problem solved.

Thanks again for the heip
Thanks for posting the resolution of the issue. I've added 'RESOLVED' to your thread title.

Graham
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:28 AM.