When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi everyone, hope you're all prepped for the Labour Day weekend if you are in the States or enjoying the Bank Holiday in the UK.
As the summer has finally slowed down from completely overwhelming to just stressful (family, work, health etc., you all get it), I have finally gotten the chance to get the 06 Coupe project off the jackstands and back to legal / running.
With that, the parts stash has to go so I can actually work in the garage and not trip over everything! Also, given the help that this community has given to me in the past, I can hopefully help some of you get your projects moving again.
Normally I try to get everything pulled with hardware and fasteners and nothing is too small so please reach out .
Currently I have a complete 04 vert, most of an 01 coupe and parts for all eras of the X100 (97-00, 01-03 and final run). A full listing will go up in the Marketplace later today but in the meantime please let me know how I can help.
04 vert, 4.2 with excellent compression and ran great until the trans went. LHK paint over LHJ trim.
I am looking for a set of 18" Flutes. It looks like the '04 has them. Are they in decent shape?
How are the drivers seat bottoms in terms. of stiffness/support? Any decent ones?
I am also looking for a roof console with the mic wired in. You said the '04 has Nav so i guess it has the phone connect as well?
I am looking for a set of 18" Flutes. It looks like the '04 has them. Are they in decent shape?
How are the drivers seat bottoms in terms. of stiffness/support? Any decent ones?
I am also looking for a roof console with the mic wired in. You said the '04 has Nav so i guess it has the phone connect as well?
Enjoy the Smile!
Ycymry, the wheels that came with the vert I believe are apollos and as of right now are on my other car. If I can get the set I want, they will go up for sale as well. They are in solid shape all around but definitely have some curb rash.
I have two seat bottoms for the drivers and both are in decent shape. One is better than the other and I can get you photos tomorrow.
I have several roof consoles with the mic. Do you have a color preference? I assume gray but please let me know.
I think I need the convertible top latch mechanism. I have developed a leak up there. Long shot, but there is a little plastic water deflector above the RHS headlamp in the engine compartment. Looks like they tend to go missing easily. Also a purge valve for the charcoal canister. In the states...
Ycymry, the wheels that came with the vert I believe are apollos and as of right now are on my other car. If I can get the set I want, they will go up for sale as well. They are in solid shape all around but definitely have some curb rash.
Ok thanks.
I have two seat bottoms for the drivers and both are in decent shape. One is better than the other and I can get you photos tomorrow.
I am looking for AGD on the seats. I believe that is "Oatmeal".
I have several roof consoles with the mic. Do you have a color preference? I assume gray but please let me know.
I think I need the convertible top latch mechanism. I have developed a leak up there. Long shot, but there is a little plastic water deflector above the RHS headlamp in the engine compartment. Looks like they tend to go missing easily. Also a purge valve for the charcoal canister. In the states...
Mike, I can defs do the latch for you. $75 plus shipping if that works?
Purge valve would be $45 plus shipping
I believe that I have the water deflectors but will have to check.
PM me with details and can get them pulled. If you want all I can bundle the and amkie the shipping a little better as well.
Ycymry, the wheels that came with the vert I believe are apollos and as of right now are on my other car. If I can get the set I want, they will go up for sale as well. They are in solid shape all around but definitely have some curb rash.
Ok thanks.
I have two seat bottoms for the drivers and both are in decent shape. One is better than the other and I can get you photos tomorrow.
I am looking for AGD on the seats. I believe that is "Oatmeal".
I have several roof consoles with the mic. Do you have a color preference? I assume gray but please let me know.
Like the seats I am looking for AGD (Oatmeal).
Copy that. I don't think I have a seat in oatmeal but will double check.
The roof console in oatmeal is $60 shipped. PM me with details and I can get it pulled for you.
Hi I am looking for a ECU for a 97 xk8 either a LJA1410AH, or a LJA1410AK if you have one
Dave
Dave I do have one available. It has been rebuilt some time in the past and was removed from a run and drive. Would $125 work? PM me with details if you want to move forward.
Thanks!
I am actually looking for that charchoal cannister purge valve for a U.S. 2001 (convertible, if that makes as difference) myself, if you have or can get a second one.
I am actually looking for that charchoal cannister purge valve for a U.S. 2001 (convertible, if that makes as difference) myself, if you have or can get a second one.
Thanks!
Jim, let me double check as I should have two of them floating around, if not i can access another.
I think I do. Will check this afternoon and let you know.
Thanks!
great ! I do have the top section, but need the bottom “scoop”. If you just want to sell the whole assembly, that’s fine. You can PM me if you have the piece (for 2002 XKR)..
I may be in need of the convertible top latch mechanism and the steering wheel switches for the stereo control. And a long shot - there is supposed to be a small shallow plastic gutter from the right front fender that directs water from the fender lip over the headlight bucket. I have the driver's side gutter, the passenger side has gone missing.
Last edited by MikeGriese; Sep 2, 2025 at 04:24 PM.
I may be in need of the convertible top latch mechanism and the steering wheel switches for the stereo control. And a long shot - there is supposed to be a small shallow plastic gutter from the right front fender that directs water from the fender lip over the headlight bucket. I have the driver's side gutter, the passenger side has gone missing.
Thought of another one - the purge valve assembly in the left front wheel well behind the shroud.
great ! I do have the top section, but need the bottom “scoop”. If you just want to sell the whole assembly, that’s fine. You can PM me if you have the piece (for 2002 XKR)..