Shop Manual
#1
Shop Manual
Howdy Folks!!...
This is a request for one of you official Jag Techies that works in a Jag Dealers Shop. Could you please look up the "shop time" for R&R fog lamps?. I'm probably going to take her up to a local Ford dealer here to get them done, just as soon as my Fog lamp assemblies and backs arrive from JPLV. We couldn't determine for sure what the time allotment was for the job, and I would like to be prepared for the usual arm wrasslin' over costs.
Now I'll have to hide from h2oboy 'cause he'll call me an Old Poop for not doing it myself...
Thanks Fellas
Drive On!!...
Fast Freddie
This is a request for one of you official Jag Techies that works in a Jag Dealers Shop. Could you please look up the "shop time" for R&R fog lamps?. I'm probably going to take her up to a local Ford dealer here to get them done, just as soon as my Fog lamp assemblies and backs arrive from JPLV. We couldn't determine for sure what the time allotment was for the job, and I would like to be prepared for the usual arm wrasslin' over costs.
Now I'll have to hide from h2oboy 'cause he'll call me an Old Poop for not doing it myself...
Thanks Fellas
Drive On!!...
Fast Freddie
#2
and direct you to this link Freddie (Page 1-10 of the Parts List file in our FAQ thread)..it has R&R for many of the common parts. Says they are included in the R&R of the bumper cover, which they have listed at 3.8 hours or 0.4 hours each if done separately. You do the math.
Yes, and a little razzin for not trying it yourself too. You ask a body shop yet? they will have better rates...its an option
Yes, and a little razzin for not trying it yourself too. You ask a body shop yet? they will have better rates...its an option
#3
Hi h2oboy
I saw that before, but didn't look close enough. I thought that was removing the whole enchilada (front clip). TexasDan indicated that removing the nose wasn't needed. I will check with a body shop or three. Now if I had a nice shop or garage (hopefully soon), I would be tempted, but I need some better tools and whatnot...
Thank you folks for the help
Drive on!!...
Fast Freddie
I saw that before, but didn't look close enough. I thought that was removing the whole enchilada (front clip). TexasDan indicated that removing the nose wasn't needed. I will check with a body shop or three. Now if I had a nice shop or garage (hopefully soon), I would be tempted, but I need some better tools and whatnot...
Thank you folks for the help
Drive on!!...
Fast Freddie
Thread
Thread Starter
Forum
Replies
Last Post
aholbro1
XJ XJ6 / XJR6 ( X300 )
17
08-05-2021 05:02 AM
jagent
Australia - Victoria / Tasmania
2
09-07-2015 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)