Jaguar Forums - Jaguar Enthusiasts Forum
New loom solder tubed to plug pigtail. The free ends were loaded with the outer shrink tube and the solder tube, then the wires twisted together and the tube slid up.
New loom solder tubed to plug pigtail. The free ends were loaded with the outer shrink tube and the solder tube, then the wires twisted together and the tube slid up.
0 2025/01/06 07:50:11
Partially completed splices
Partially completed splices
0 2025/01/06 07:50:16
Finished splices prior to their being wrapped individually with silicone self amalgamating tape.
Finished splices prior to their being wrapped individually with silicone self amalgamating tape.
0 2025/01/06 07:50:19
0 2025/01/06 07:50:22
0 2025/01/06 07:50:26
Madame's mother is a great help on these occasions and here she is holding up the wrapped and completed loom she helped me finish today. Adhesive loom wrap works really well and makes a decent looking end product.
Madame's mother is a great help on these occasions and here she is holding up the wrapped and completed loom she helped me finish today. Adhesive loom wrap works really well and makes a decent looking end product.
0 2025/01/06 07:50:29
0 2025/01/11 01:51:41
0 2025/01/11 07:04:50
0 2025/01/11 07:07:28
0 2025/01/11 07:07:31
0 2025/01/11 07:07:34
0 2025/01/11 07:07:37
0 2025/01/11 07:07:40
Blue rinf shows the pump output connectioins to the oil galleries. Red ring shows (round connection circled) the oil cooler return feed to the pump and (pipe circled) the pipe from the sump pickup joining the casting. The TWO input to the oil pump.
Blue rinf shows the pump output connectioins to the oil galleries. Red ring shows (round connection circled) the oil cooler return feed to the pump and (pipe circled) the pipe from the sump pickup joining the casting. The TWO input to the oil pump.
0 2025/01/12 08:45:38
Close up shots.
Close up shots.
0 2025/01/12 08:45:43
0 2025/01/12 09:11:51
0 2025/01/12 09:13:44
0 2025/01/12 09:18:18
0 2025/01/12 09:33:35
0 2025/01/12 09:36:15
0 2025/01/12 09:37:25
It turns out shorter hoses are a BAD idea!
It turns out shorter hoses are a BAD idea!
0 2025/01/15 01:08:16
Shows the distinct outward splay of the injectors. The hole in the manifold is also angled to accept this angled insertion.
Shows the distinct outward splay of the injectors. The hole in the manifold is also angled to accept this angled insertion.
0 2025/01/15 07:40:11
0 2025/01/15 07:40:16
0 2025/01/15 07:40:19
0 2025/01/22 07:40:46
New loom being cable tied to the rail, NOT in the bottom of the V.
New loom being cable tied to the rail, NOT in the bottom of the V.
0 2025/01/22 07:43:52
Combined loom wires wrapped together and cable tied in place.
Combined loom wires wrapped together and cable tied in place.
0 2025/01/22 07:43:57
Close-up of the spliced OEM injector loom plug connected to the car loom.
Close-up of the spliced OEM injector loom plug connected to the car loom.
0 2025/01/22 07:44:02
0 2025/01/22 08:12:02
0 2025/01/22 08:13:58
0 2025/01/26 08:40:10
0 2025/01/26 08:40:14
0 2025/01/26 08:40:17
It would need about an inch welded in a shown in blue
It would need about an inch welded in a shown in blue
0 2025/01/15 12:54:21
0 2025/01/16 05:05:16
0 2025/01/16 05:15:03
0 2025/01/16 05:17:30
Offering up the rail
Offering up the rail
0 2025/01/22 07:40:31
Front two injectors fitted after the back five each side have been fitted
Front two injectors fitted after the back five each side have been fitted
0 2025/01/22 07:40:36