Jaguar Forums - Jaguar Enthusiasts Forum
Oetiker clamp on the injector, stainless fuel pipe clamp on the rail spigot
Oetiker clamp on the injector, stainless fuel pipe clamp on the rail spigot
0 2025/01/22 07:40:39
Front injector close-up
Front injector close-up
0 2025/01/22 07:40:42
0 2025/02/03 05:41:07
0 2025/02/07 08:19:21
0 2025/02/14 12:44:18
0 2025/02/14 06:34:15
0 2025/02/14 06:34:18
0 2025/02/14 06:34:22
0 2025/02/14 12:43:47
0 2025/02/14 12:44:15
The actaution cable used the grommet thatthe huge loom cable has to enter the engine bay. Mine being a RHD car, but usingthe Left side would be the same. The unit was mounted upright.
The actaution cable used the grommet thatthe huge loom cable has to enter the engine bay. Mine being a RHD car, but usingthe Left side would be the same. The unit was mounted upright.
0 2025/03/09 22:14:52
0 2025/03/17 01:19:35
Cluster white part off the black front part reveals the green filters
Cluster white part off the black front part reveals the green filters
0 2025/03/17 01:20:36
Green fiters off the cluster, these were, in fact, not darkened.
Green fiters off the cluster, these were, in fact, not darkened.
0 2025/03/17 01:20:40
Some of the green filter locations, you can jusr see the small rivet holes that hold them on each side of the bulb hole
Some of the green filter locations, you can jusr see the small rivet holes that hold them on each side of the bulb hole
0 2025/03/17 01:21:21
Frant water manifolds Lutz mod modified. The idea is to ensure the cooled water from the rad does not "short circuit" through the front manifolds, but is puished equally to the rear ones.
Frant water manifolds Lutz mod modified. The idea is to ensure the cooled water from the rad does not "short circuit" through the front manifolds, but is puished equally to the rear ones.
0 2025/03/22 01:15:55
Finished item.
Finished item.
0 2025/03/01 02:14:28
1/2 inch UNC studs into the diff, loctited in. taper washers and nylocs
1/2 inch UNC studs into the diff, loctited in. taper washers and nylocs
0 2025/03/01 02:14:25
Studs screwed into the diff through the cage
Studs screwed into the diff through the cage
0 2025/03/01 02:16:21
Tapered washers to fit into the tapered hole in the cage
Tapered washers to fit into the tapered hole in the cage
0 2025/03/01 02:16:25
OEM dif to cage fixing bolt. Using a stud allows far deeper threading into the diff casing and more reliable clamping.
OEM dif to cage fixing bolt. Using a stud allows far deeper threading into the diff casing and more reliable clamping.
0 2025/03/01 02:19:44
0 2025/03/02 07:20:45
Modulator ringed in blue
Modulator ringed in blue
0 2025/03/02 07:21:30
A bank odd numbered batch wires this side of the plug
A bank odd numbered batch wires this side of the plug
0 2025/05/23 02:01:58
B bank even numbered batch wires this side of the plug
B bank even numbered batch wires this side of the plug
0 2025/05/23 02:02:01
0 2025/05/23 02:02:04
Wires from the OEM plug carefully labelled. It is all to eay to lose track of what goes where otherwise.
Wires from the OEM plug carefully labelled. It is all to eay to lose track of what goes where otherwise.
0 2025/05/23 02:02:07
0 2025/05/23 02:16:03
0 2025/05/24 09:46:37
0 2025/05/26 10:01:27
0 2025/04/27 00:55:07
0 2025/04/14 09:58:45
This is my car now, one strut locates the radiator and aircon condensor/oil cooler stack, and there is another locating the fans, which are fixed at the bottom to the chassis cross member to which studs are welded onto which brackets from the fans are fixed
This is my car now, one strut locates the radiator and aircon condensor/oil cooler stack, and there is another locating the fans, which are fixed at the bottom to the chassis cross member to which studs are welded onto which brackets from the fans are fixed
0 2025/04/14 10:11:59
Wrecked hub tube
Wrecked hub tube
0 2025/04/20 00:46:10
New outers of the bearing in place, plus oil seal on the outer end of the hub carrier
New outers of the bearing in place, plus oil seal on the outer end of the hub carrier
0 2025/04/20 00:47:59
New outer bearing inner race drifted into position
New outer bearing inner race drifted into position
0 2025/04/20 00:48:42
New inner race of the inner hub bearing partially drifted into place on the hub tube.
New inner race of the inner hub bearing partially drifted into place on the hub tube.
0 2025/04/20 00:52:00
Bearing fully drifted into place. It is the space bewteen the bearing (pointer on it) and the hub tube (inside the bearing below it) that the spacer is requied for
Bearing fully drifted into place. It is the space bewteen the bearing (pointer on it) and the hub tube (inside the bearing below it) that the spacer is requied for
0 2025/04/20 00:53:05
Measure gap with caliper
Measure gap with caliper
0 2025/04/20 01:01:03
Gap reading
Gap reading
0 2025/04/20 01:01:06