Jaguar Forums - Jaguar Enthusiasts Forum
Fourth one in from the right on the bottom row.
Fourth one in from the right on the bottom row.
0 2017/01/04 13:04:46
Haven't checked up close to see if any pins are stuck in this one yet.
Haven't checked up close to see if any pins are stuck in this one yet.
0 2017/01/08 11:39:10
Possibly looks worse than it is.
Possibly looks worse than it is.
0 2017/01/08 11:39:17
This is what I'm after, or the LNA1410YD/211 will also do the job.
This is what I'm after, or the LNA1410YD/211 will also do the job.
0 2017/01/08 11:39:23
Arrival day with a list of niggly bits but with a VIN less than 5k..I didn't mind. Friends in the background.
Arrival day with a list of niggly bits but with a VIN less than 5k..I didn't mind. Friends in the background.
0 2017/01/08 13:43:53
0 2017/01/09 07:25:51
0 2017/01/09 07:25:57
0 2017/01/09 07:26:06
0 2017/01/09 07:26:12
1996 XK8 Vehicle Care page
1996 XK8 Vehicle Care page
0 2017/01/12 05:29:21
0 2017/01/12 08:54:16
Just about see where some of the connector is missing in the middle of the middle row.
Just about see where some of the connector is missing in the middle of the middle row.
0 2017/01/13 06:02:18
This is one I'm using to replace LNA1410BE/211
This is one I'm using to replace LNA1410BE/211
0 2017/01/13 06:02:25
In situ
In situ
0 2017/01/13 06:02:31
All relatively inexpensive and will go into 'stock' for future diagnosis's.
All relatively inexpensive and will go into 'stock' for future diagnosis's.
0 2017/01/13 06:02:39
Detached coolant level sensor.
Detached coolant level sensor.
0 2017/01/17 07:53:03
Aperture looks like its been repaired before.
Aperture looks like its been repaired before.
0 2017/01/17 07:53:14
Poorly connector.
Poorly connector.
0 2017/01/27 06:03:07
New one,also soldered and insulated before splicing in.
New one,also soldered and insulated before splicing in.
0 2017/01/27 06:03:14
0 2017/05/05 10:32:55
0 2017/05/05 10:33:24
0 2017/05/13 03:36:52
0 2017/05/13 03:37:14
Can see why the rotor arm didn't want to come off.
Can see why the rotor arm didn't want to come off.
0 2017/05/16 09:15:39
Finally gave it up after a little persuasion.
Finally gave it up after a little persuasion.
0 2017/05/16 09:15:49
Cleaned.
Cleaned.
0 2017/05/16 09:16:03
The old and the new.
The old and the new.
0 2017/05/16 09:16:12
This was after I'd tried cleaning it up before replacing the crank sensor and starting her up.
This was after I'd tried cleaning it up before replacing the crank sensor and starting her up.
0 2017/05/16 09:16:24
The one on the left is the larger one (EBC1253) that will not work on my 1993 3.2s
The one on the left is the larger one (EBC1253) that will not work on my 1993 3.2s
0 2017/05/18 13:03:53
The lower,smaller bracket was from an X300 3.2 and although fits the connectors are different and required some fudging.
The lower,smaller bracket was from an X300 3.2 and although fits the connectors are different and required some fudging.
0 2017/05/18 13:04:01
0 2017/05/23 09:06:08
Not really sure about this...
Not really sure about this...
0 2017/05/23 09:17:09
0 2017/05/23 09:20:34
0 2017/05/23 09:21:35
0 2017/05/23 09:21:45
0 2017/05/23 09:23:18
Not perfect but better
Not perfect but better
0 2017/05/23 09:26:07
0 2017/05/23 09:27:06
Hope the yellow line shows up.
Hope the yellow line shows up.
0 2017/05/28 10:56:27
The discs at either end are all that is left of the old bushes...I think. The rest turned into dust.
The discs at either end are all that is left of the old bushes...I think. The rest turned into dust.
0 2017/05/28 11:06:23