Jaguar Forums - Jaguar Enthusiasts Forum
All the air
All the air
0 2017/06/07 09:26:46
Patchy is norm after the first coat.
Patchy is norm after the first coat.
0 2017/06/07 11:03:05
I did go over the seams and awkward areas with a small paint brush.
I did go over the seams and awkward areas with a small paint brush.
0 2017/06/07 11:03:17
I did another coat after this for good measure but probably needn't have bothered.
I did another coat after this for good measure but probably needn't have bothered.
0 2017/06/07 11:05:52
The end result.
The end result.
0 2017/06/07 11:12:05
0 2017/06/07 11:14:32
15" banded steel 5 x 120
15" banded steel 5 x 120
0 2017/06/10 12:26:37
Couldn't see the size in full just 195 r15.Bonus points if you can guess what car they're on.
Couldn't see the size in full just 195 r15.Bonus points if you can guess what car they're on.
0 2017/06/10 12:37:43
Before.
Before.
0 2017/06/10 12:41:23
After.
After.
0 2017/06/10 12:42:27
Just a coat of lacquer? Don't think so.
Just a coat of lacquer? Don't think so.
0 2017/06/11 11:31:02
That's better.
That's better.
0 2017/06/11 11:32:13
Although not by much these are a staggered set.
Although not by much these are a staggered set.
0 2017/07/01 09:16:07
Big fat tyres.
Big fat tyres.
0 2017/07/01 09:16:20
At this point I was misguided into thinking they looked a tad small.
At this point I was misguided into thinking they looked a tad small.
0 2017/07/01 09:16:32
Sorry, forgot tot mention I 'd tidied up the front grill and bumper a bit.
Sorry, forgot tot mention I 'd tidied up the front grill and bumper a bit.
0 2017/07/01 09:16:44
Rear end still needs some tlc though.
Rear end still needs some tlc though.
0 2017/07/01 09:16:55
Now it's started to settle properly.
Now it's started to settle properly.
0 2017/07/01 09:17:08
0 2017/07/01 09:17:21
.
.
0 2017/07/01 09:17:22
From left to right. Pipercross, K&N, Ash.
From left to right. Pipercross, K&N, Ash.
0 2017/07/03 09:56:52
Here's what we started with.
Here's what we started with.
0 2017/07/03 10:19:33
Top section and filter removed.
Top section and filter removed.
0 2017/07/03 10:22:16
The securing bolt decided to come off also,bit of super glue sorted that.
The securing bolt decided to come off also,bit of super glue sorted that.
0 2017/07/03 10:25:20
Needed to cut as close to the main part of the base.
Needed to cut as close to the main part of the base.
0 2017/07/03 10:27:48
Nothing fancy,just used a wood saw and cleaned the edges up with some sandpaper.
Nothing fancy,just used a wood saw and cleaned the edges up with some sandpaper.
0 2017/07/03 10:28:02
Perfect fit.
Perfect fit.
0 2017/07/03 10:54:01
Screwdriver and a bit of persuasion et voila. This part wasn't glued or bonded so came apart easily
Screwdriver and a bit of persuasion et voila. This part wasn't glued or bonded so came apart easily
0 2017/07/03 10:55:49
99% done.
99% done.
0 2017/07/03 11:01:26
1st coat of etch primer
1st coat of etch primer
0 2017/07/06 08:59:38
The onto the satin black
The onto the satin black
0 2017/07/06 08:59:51
Forgot about the handles to start with.
Forgot about the handles to start with.
0 2017/07/06 09:00:04
Three coats did the job.
Three coats did the job.
0 2017/07/06 09:00:16
Same process for this side.
Same process for this side.
0 2017/07/06 09:00:28
0 2017/07/06 09:17:37
0 2017/07/06 09:17:48
0 2017/07/06 09:18:02
The two middle silencers.
The two middle silencers.
0 2017/07/14 13:19:41
All gone.
All gone.
0 2017/07/14 13:24:50
Having the overlap made welding the joins much easier.
Having the overlap made welding the joins much easier.
0 2017/07/14 13:29:56