Jaguar Forums - Jaguar Enthusiasts Forum
0 2018/04/20 14:10:51
Etch primer is a much if you want the paint to stay on.
Etch primer is a much if you want the paint to stay on.
0 2018/04/21 13:44:11
The little flaps you can see are to allow access,in my case to remove the bottom retaining screw for the foglights (and connectors)
The little flaps you can see are to allow access,in my case to remove the bottom retaining screw for the foglights (and connectors)
0 2018/04/21 13:44:26
0 2018/04/21 13:44:39
Quite like the openess of the front without the grill.Have contemplated using mesh instead of the plastic inserts.
Quite like the openess of the front without the grill.Have contemplated using mesh instead of the plastic inserts.
0 2018/04/21 13:44:52
Temp fix on the fog light lense using all weather transparent tape.
Temp fix on the fog light lense using all weather transparent tape.
0 2018/04/21 13:45:06
Grill and headlight surrounds back in place.
Grill and headlight surrounds back in place.
0 2018/04/22 12:02:26
Spot the old overspray.
Spot the old overspray.
0 2018/04/22 12:02:41
0 2018/04/22 12:02:54
Last of the jobs prior to Mot.
Last of the jobs prior to Mot.
0 2018/04/22 12:03:07
0 2018/04/22 12:03:22
Part One complete...now onto the stuff you can't see.
Part One complete...now onto the stuff you can't see.
0 2018/04/23 04:29:34
Taking advantage of the ramp to get a good dose of underseal on,after a thorough wire-brushing. Think I might be getting rid of all those exhausts though....
Taking advantage of the ramp to get a good dose of underseal on,after a thorough wire-brushing. Think I might be getting rid of all those exhausts though....
0 2018/04/24 13:21:56
Drivers side wasn't the worst
Drivers side wasn't the worst
0 2018/04/24 13:22:05
Passenger side extended back along the inner sill.
Passenger side extended back along the inner sill.
0 2018/04/24 13:22:16
Everything tacked into place
Everything tacked into place
0 2018/04/24 13:22:27
Intricate pieces make the form.
Intricate pieces make the form.
0 2018/04/24 13:22:36
Luckily I could move the wiring far enough away from the heat....touch and go in the corner though.
Luckily I could move the wiring far enough away from the heat....touch and go in the corner though.
0 2018/04/24 13:22:51
Seam sealed and undersealed.
Seam sealed and undersealed.
0 2018/04/24 13:23:02
Not going to have to do this one again.
Not going to have to do this one again.
0 2018/04/24 13:23:11
0 2018/05/05 12:38:10
0 2018/05/05 12:38:15
Cut same place both sides,ideal access for welding back in place.
Cut same place both sides,ideal access for welding back in place.
0 2018/05/25 00:56:13
Under this wadding there are three pipes running in an 'S' shape.
Under this wadding there are three pipes running in an 'S' shape.
0 2018/05/25 01:03:25
Empty.
Empty.
0 2018/05/25 01:03:38
Perforated 50mm pipe tacked into place.
Perforated 50mm pipe tacked into place.
0 2018/05/25 01:03:51
Standard exhaust wadding wrapped once round the pipe and secured with welding wire.
Standard exhaust wadding wrapped once round the pipe and secured with welding wire.
0 2018/05/25 01:04:03
Same for both boxes.
Same for both boxes.
0 2018/05/25 01:07:15
There is plenty of load on these springs. Do not attempt to remove without taking the proper safety precautions.
There is plenty of load on these springs. Do not attempt to remove without taking the proper safety precautions.
0 2018/05/25 08:03:57
Six bolts holding the support plate in place.
Six bolts holding the support plate in place.
0 2018/05/25 08:04:07
Threaded rod in place with securing nuts,put these in place one at a time.
Threaded rod in place with securing nuts,put these in place one at a time.
0 2018/05/25 08:04:17
Jack holds the spring tension in check as you undo the securing nuts.Pay attention to the threads so they don't undo at the same time as the nuts.
Jack holds the spring tension in check as you undo the securing nuts.Pay attention to the threads so they don't undo at the same time as the nuts.
0 2018/05/25 08:04:29
First one done.
First one done.
0 2018/05/25 08:04:38
Remember if you take to much off you can't stick it back on.
Remember if you take to much off you can't stick it back on.
0 2018/05/25 08:19:10
The rears will remain untouched but I might see what a slightly bigger tyre on the rear does for the overall look.
The rears will remain untouched but I might see what a slightly bigger tyre on the rear does for the overall look.
0 2018/05/25 08:33:21
Plenty of clearance still.
Plenty of clearance still.
0 2018/05/25 08:33:35
Loosening this bolt makes releasing the belt tension sooo much easier.....I didn't realise this the first time I did one.
Loosening this bolt makes releasing the belt tension sooo much easier.....I didn't realise this the first time I did one.
0 2018/06/12 12:02:00
Tensioner at the bottom of the picture. First couple of pipes removed.
Tensioner at the bottom of the picture. First couple of pipes removed.
0 2018/06/12 12:02:11
Old pump off.
Old pump off.
0 2018/06/12 12:13:10
Something was bound to leak at some point.
Something was bound to leak at some point.
0 2018/06/12 12:13:24