Hello everyone, i have big problem, my f type has no battery inside because it is water damaged, and i need to disassemble the seats, but can't move them with no power. So the question is somebody can help me and explain how to connect directly to the seat motors connectors for move them with a 12v power supply, to which pin or wire i need connect the battery for move them, thank you all in advance!

Connectors underseat

 

Start here. Your pictures appear to come from that thread.
https://www.jaguarforums.com/forum/f...8/#post2684077

 

those pictures is just the reference, i have the same connectors on my seats, that tread didn't help me, im still not understand how to connect 12v to move those motors.

 

In that thread, the guy had the door switchpacks, which communicate digitally with the controller in the seat. I think you’d have to disconnect the controller in the seat if you wanted to power the motors manually. You could presumably then damage them, as the limit switches are handled by the controller.

 

Bump