Hello, new here in need of some help. Car was stolen and recovered, damage is thief removed overhead console with dome lights and cut the wires, I have sourced the console and have connectors that are bare, i need basically a picture of the connectors on your so I can duplicate and repair. I was told its the body harness and its like 7k buy and i cant find a salvage yard that has any cars to cut from or look at.


2016 F-type 3.0 supercharged,

 

I hope this helps

 

thank you, I was really hoping for an image as there is more wires and a second connector with 8 wires in it the eight wire one is the only one I really need , i was able to save the larger connector and wire.

 

Please forgive me for asking the question but what possible reason would somebody who stole your car have to butcher the car that way?

 

I’m guessing the sos may have tracking? Or the lojack was there inside but frustrating?

 

https://www.jaguarforums.com/forum/f...talled-134047/
https://www.jaguarforums.com/forum/f...nstall-106666/

here a a couple of threads that show the harness . Hope it's what you are after

 

Can anyone help? My roof console has two plugs, some only have one. I’ll gladly donate to the site or pay anyone for their time.

 

Mine is also a 2016. There are two connectors on mine, but only one has a cable attached. It's the larger, grey one. I just pulled the unit out on my car to get pictures for you. Is this what you're looking for?

 

Thank you so much! Unfortunately I have the two plugs so it all different. Amazing gesture much appreciated.

 

Your picture looks like mine. There are two connectors on that side, one on the other. Only the grey one on that side has a cable connected.



If there is anything specific you need to know before I button it back up, let me know.

 

@ericzz I've still got it apart at the moment and if there's no more detail I can provide I'll reassemble it. It's morning here, and I'll button it up at lunchtime if I don't hear anything further.

 

Thanks I have a different console I presume. I have two gray connectors, you seem to have just the one. I need to see both on a car that matches mine. Thank you again for tying to help me.

 

As I said a couple of messages ago, the panel has three connectors. The black one has nothing attached but there are two grey connectors, one on each side. One of your pictures shows a connector still attached, so I put up detailed pictures of the other.

 

How did I miss that. So you have two gray connectors. One has more wires than the other. I need to match the smaller 8 wires connector. I’ll look tonight at home and compare. Thank you.

 

It's a 12-pin connector with only eight wires going to it. One of my pictures is a bit blurry, the other was dark enough that the colors aren't as obvious. I'll take some more pictures before I put it back together and see if I can improve on those.

 

Thanks again! More the better. Enjoy the rest of your day.

 

More. Better?

 

I’ll tackle this in the am. Thanks.

 

So I guess I’m back to square one. My car has all different wire colors. If anyone has any thoughts I am all ears! Thanks.

 

Can't say I didn't try. Mine was an early production 2016 (man. 6/15), perhaps yours is later. I think the 2017 had different wiring than mine. I remember that coming up in discussions of hard-wiring radar detectors.

EDIT: Looking at the links posted by @Borbor there is one that mentions the colors changing. My speculation at the time was heat, since my car lives outside:

https://www.jaguarforums.com/forum/f...6/#post2332704