Hi guys.
Mine is standard model w/o side skirt.

I bought one of oem side skirt originally for svr and tonight, I'm going to install it.

Is it easy?

Who know what tools I need for skirt installation?

 

I’m not certain, but I don’t think the SVR side skirts will fit the standard models.

 

i bought 2015 R side skirt which looks aggressive. think you know what it is

and believe that it must fit to standard model..

should i remove side panel to install this seal?

 

The R skirt will fit the base and S models, but the SVR skirt probably doesn’t. Others have installed the skirts. They should be able to advise you on installation. I personally prefer the sleeker look without skirts.

 

It’s a total pain to install, but worth it in my opinion. You will have to remove the rocker panels to install properly.

 

this is what I bought

my car is p380 standard

wonder if my rocker panel has the place for the bolts to install this seal.

 

it will not have them. You will need to drill.

 

are you sure for me to need to drill the panel?
if it is, isnt it hard?

 

Drilling holes is easy. It’s putting them in the right place that’s the challenge.

 

take a look under your car. You won’t see any holes in the side skirt. You will need to drill and use screws. I tried double sided tape originally, since my car was a lease, and it just wouldn’t hold everything together properly.

 

Professional shop can do it I believe.....Right?

 

It can be installed if I bring it to the professional shop...right?

 

It can be installed if I bring it to the professional shop...right?

 

any competent shop should be able to do it.

 

Give a good shop enough money and they can pretty much do anything