Top Hat Sleeves for my xk 4.2 and other goodies
#1
#2
I would think your main cost is going to be the machining of the block to allow a lipped liner to be inserted. This will involve a full strip-down to a bare block.
Here's a set on eBay: -
https://www.ebay.co.uk/p/Jaguar-4-2-...ype/1948672186
Here's a set on eBay: -
https://www.ebay.co.uk/p/Jaguar-4-2-...ype/1948672186
The following users liked this post:
Napoleon Solo (03-06-2019)
#3
Thanks Fraser,
The block and head are already at the machine shop. It's turning out to be more reasonable than I thought at around $2000 for hot tank, decking, line honing, balancing and blue printing, flywheel lightening. I'm looking at $1000 for 6 sleeves though...and another $350 for head studs. Jeez! I also want to replace all of the other intake/ exhaust/ head studs too. Nobody seems to sell a complete package.
Anyway, thanks for the link.
Ron
The block and head are already at the machine shop. It's turning out to be more reasonable than I thought at around $2000 for hot tank, decking, line honing, balancing and blue printing, flywheel lightening. I'm looking at $1000 for 6 sleeves though...and another $350 for head studs. Jeez! I also want to replace all of the other intake/ exhaust/ head studs too. Nobody seems to sell a complete package.
Anyway, thanks for the link.
Ron
Thread
Thread Starter
Forum
Replies
Last Post
XxSlowpokexX
XK8 / XKR ( X100 )
24
05-29-2015 06:13 AM
jeffrimerman
X-Type ( X400 )
7
10-24-2010 04:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)