Thread Display Options...?
#1
Thread Display Options...?
Hallo all,
there are 3 modes to view a thread: Linear/Threaded/Hybrid.
By entering the:
user CP
Settings & Options
Thread Display Options
(the help page, shows these 3 modes)
you should be in the thread and on the RH side top bar you find the "Display Mode"
I can not find the "Display Mode"...
Please for help/
Thank you.
there are 3 modes to view a thread: Linear/Threaded/Hybrid.
By entering the:
user CP
Settings & Options
Thread Display Options
(the help page, shows these 3 modes)
you should be in the thread and on the RH side top bar you find the "Display Mode"
I can not find the "Display Mode"...
Please for help/
Thank you.
Last edited by panagiotis; 05-28-2014 at 04:26 AM.
#2
Panagiotis,
1. click on User CP button on the black menu bar (circled in red)
2. click on Edit Options in the list on the left (arrowed in red)
3. scroll down the Edit Options to Thread Display Options
4. in Thread Display Mode, choose the required display (arrowed in red)
5. finally, scroll down to the bottom of the page and click on Save Changes
The Reset Fields button at the bottom puts all settings back to default.
Graham
1. click on User CP button on the black menu bar (circled in red)
2. click on Edit Options in the list on the left (arrowed in red)
3. scroll down the Edit Options to Thread Display Options
4. in Thread Display Mode, choose the required display (arrowed in red)
5. finally, scroll down to the bottom of the page and click on Save Changes
The Reset Fields button at the bottom puts all settings back to default.
Graham
Last edited by GGG; 05-28-2014 at 02:19 AM.
#3
#4
The following users liked this post:
panagiotis (05-28-2014)
#6
Thread
Thread Starter
Forum
Replies
Last Post
Foosh
F-Type ( X152 )
3
09-11-2015 03:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)