Hi everyone. I am currently own my 3rd and 4th Jaguars. One is a 98 vanden plas and the other is 00 vanden plas. The other two 95 and 96 XJ6.

I joined the group after doing some research in an effort to repair the 00. It starts and runs but sputters. Scan says there is a misfire on all cylinders. I changed spark plugs and will change the coils as well. Was also told it could be the camshaft position sensor or crankshaft sensor.

Any help would be appreciated. I got a very good deal on this car that is in immaculate condition with 93k on the dash. So trying to keep the cost to repair down.

Thanks,

 

welcome to the forum - plenty of info and support here.

Check out the X308 section for a wealth of support
XJ ( X308 ) XJ8 / XJR - Jaguar Forums - Jaguar Enthusiasts Forum

check out the lower atlantic regional section for local news/events:

Lower Atlantic - NC SC FL GA - Jaguar Forums - Jaguar Enthusiasts Forum

 

Welcome!

 

Welcome to Jaguar Forums Sam,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

Hi and welcome aboard, its good to have you here with us here at Jaguarforums

If you need any further help with the site moving forward, please just ask any moderator, veteran member and we'll be glad to assist.

In the meantime, any useful site information you may need such as how to post pictures, edit signatures, add videos, using the
search facility etc, can be found here within the following link Helpful_information

There are lots of members local to you with the same interests with info on local dealers and possible meets.
Regional - Jaguar Forums - Jaguar Enthusiasts Forum

Need a Manual, a TSB, or General Info' about your Jag? Check out our >> DOWNLOAD AREA <<

I've manually upgraded you to Full forum access so you can better view the site and all its features.
Please Jump on in and enjoy the site........

 

Welcome to the forum Sam,

Good to have you with us at Jaguar forums.

I suggest you post the actual codes in the tech forum for the best advice.

Enjoy the forums.

Graham