We had a local machine shop press new rear bearings in 95 XJS wheel assembly. When everything was back on the car there is 1/2" or more wobble in the wheel. (The machine shop ordered the bearings.)

I removed the wheel and checked the brake rotor. It's flat against the hub. We put the tire back on tightening the lug nuts in a star pattern a little at a time.

The wobble is still there. I think the machine shop didn't install the bearings correctly.

Short of pulling the wheel assembly and half shaft, taking them to the machine shop so they can see the wobble does anyone have suggestions?

I finished chemotherapy, beat the cancer and am back at work. The chemo was a bear and I'm not 100% yet. I can only work on the car a little at a time. I could have done a wheel assembly R & R in an afternoon. Now it takes several days of a little at a time.

Thanks in advance,

 

Hi and welcome aboard, its good to have you here with us here at Jaguarforums

If you need any further help with the site moving forward, please just ask any moderator, veteran member and we'll be glad to assist.

In the meantime, any useful site information you may need such as how to post pictures, edit signatures, add videos, using the
search facility etc, can be found here within the following link Helpful_information

There are lots of members local to you with the same interests with info on local dealers and possible meets.
Regional - Jaguar Forums - Jaguar Enthusiasts ForumNeed a Manual, a TSB, or General Info' about your Jag? Check out our >> DOWNLOAD AREA <<

I've manually upgraded you to Full forum access so you can better view the site and all its features.

 

Welcome to Jaguar Forums barking cricket,

Good to have you with us.
I've moved your other post to it's own thread in the XJS section you can find it here https://www.jaguarforums.com/forum/x...em-121151/take a look in your regional section too when you can USA Southern MidWest - AR LA MS KY TN AL - Jaguar Forums - Jaguar Enthusiasts Forum
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

Welcome to the forum barking cricket,

Good to have you with us at Jaguar forums and to hear you're getting back to health.

Follow this link XJS - Jaguar Forums - Jaguar Enthusiasts Forum to the main XJS forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for info on regular issues.

Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

Enjoy the forums.

Graham

 

Welcome to the forum

 

welcome to the forum -follow the links provided to a wealth of info and support - enjoy!!