Introduction
Welcome to the forums Sifiso,
Good to have you with us.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum and this one https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top of each is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Good to have you with us.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum and this one https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top of each is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Welcome to Jaguar Forums Sifiso,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
Ouch!
The worst case scenario is the module will short circuit and burn out. If it's only splashed with water then don't even turn on the ignition before removing the cover and drying it thoroughly. Up in the Northern Hemisphere we have to do this with a hair drier but I imagine it could be warm enough in Durban not to need artificial heat.
Good luck.
Graham
The worst case scenario is the module will short circuit and burn out. If it's only splashed with water then don't even turn on the ignition before removing the cover and drying it thoroughly. Up in the Northern Hemisphere we have to do this with a hair drier but I imagine it could be warm enough in Durban not to need artificial heat.
Good luck.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
davideliarosenbloom
New Member Area - Intro a MUST
9
Feb 16, 2015 07:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)


















