hi could anyone give me advice on how to remove and replace a rear wheel bearing on a 1964 jaguar mark 2 , the manual says use a tool , Churchill tool no sl13 can it be done without this tool could I use another tool , and how could it be done, kind regards Midge.

 

You can use an adapter like SL 13-1 and an impeller puller also known as an impulse extractor/ hammer. It will pull the axle and bearing but with a lot less control with the SL 13 which was designed by the maker of the Axle (Salisbury hence SL).

 

Welcome to the Forums.

Also, check the MK1/2 Tech Section, maybe there are other ways.

Good luck.

 

Hello, Midge,
Welcome to the forums from ElinorB.
(';')

 

Welcome aboard Midge.

 

Welcome to the forums Midge,

Good to have you with us.

Follow this link https://www.jaguarforums.com/forum/m...40-daimler-61/ to the MKI / MKII S type 240 340 & Daimler forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.

Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.

Enjoy the forums.

Graham

 

thanks every one , and thanks Coventry foundation.

 

Welcome to Jaguar Forums Midge,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

welcome to the forum - enjoy!!

 

hi every one ,sorry I did not add my car details , the car I am working on is a 1964 jaguar mark2.

 

Welcome to the forums.