jaguar xf 3.0 diesel twin turbo
Thread Starter
|
Junior Member
Joined: Apr 2020
Posts: 1
Likes: 0
From: leeds
jaguar xf 3.0 diesel twin turbo
Hi all i am new to this.
I have rebuilt my engine and now put back into car but could anyone tell me is it possible to have connected the two plugs the wrong way at the top of the gearbox i have a message faulty gearbox and the selector lights do not illuminate and the engine will not crank.
thanks.
cliff
I have rebuilt my engine and now put back into car but could anyone tell me is it possible to have connected the two plugs the wrong way at the top of the gearbox i have a message faulty gearbox and the selector lights do not illuminate and the engine will not crank.
thanks.
cliff
Joined: Oct 2007
Posts: 120,859
Likes: 6,641
From: PHX some of the time
Welcome to Jaguar Forums Cliff,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Joined: Dec 2011
Posts: 120,439
Likes: 17,001
From: Durham, UK
Welcome to the forums Cliff,
Jaguar harness connectors are usually selected to prevent accidental misconnection but all things are possible - I recall the X308 has four identical HO2S connectors which need very careful marking before dismantling so the XF could have a similar trap!
Follow this link https://www.jaguarforums.com/forum/xf-xfr-x250-44/ to the X250 forum for help, advice and information. You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Jaguar harness connectors are usually selected to prevent accidental misconnection but all things are possible - I recall the X308 has four identical HO2S connectors which need very careful marking before dismantling so the XF could have a similar trap!
Follow this link https://www.jaguarforums.com/forum/xf-xfr-x250-44/ to the X250 forum for help, advice and information. You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
Enjoy the forums.
Graham
Joined: Apr 2012
Posts: 25,792
Likes: 4,691
From: Summerville, South Carolina
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fabian88
New Member Area - Intro a MUST
7
Jun 19, 2018 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)