New member, please help
#1
New member, please help
hi there,
im Caroline, in new to here and just bought my first ever jag but seem to of been conned by the car dealer. Since I bought the car it runs like it's got a fuel blockage sometimes, it only does it when I'm using petrol mode, it runs great on LPG and the engine management light goes off but as soon as I switch to petrol the orange light comes back on and starts jumping like it's going to conk out. I've looked up the fault codes and it came up with 7 faults , OMG! They saw me coming😡😡😡. I will list the codes, I do know it's misfiring on cylinder 2 and 6 .
P0300, P0302, P0306, P1314, P1316, P1646, P1647 . I spoke to the garage, gave them the codes and they said it was simple and just needs sensors changing, I know that isn't the case, from the day I went to dealer I was lied to, took me for short test drive after running the car for a while first, we set off and I asked why the engine management light was on and he said not to worry it would go off when petrol was put in it as it had been run dry. Being stupid I believed him after him saying if anything went wrong with car they will put it right. It's a very long story but they are trying to get out of putting the car right. I think it needs too much doing to it and want my money back. Could anybody tell me what you think and also what the codes mean please
Caroline 🤔🤔👍👍
im Caroline, in new to here and just bought my first ever jag but seem to of been conned by the car dealer. Since I bought the car it runs like it's got a fuel blockage sometimes, it only does it when I'm using petrol mode, it runs great on LPG and the engine management light goes off but as soon as I switch to petrol the orange light comes back on and starts jumping like it's going to conk out. I've looked up the fault codes and it came up with 7 faults , OMG! They saw me coming😡😡😡. I will list the codes, I do know it's misfiring on cylinder 2 and 6 .
P0300, P0302, P0306, P1314, P1316, P1646, P1647 . I spoke to the garage, gave them the codes and they said it was simple and just needs sensors changing, I know that isn't the case, from the day I went to dealer I was lied to, took me for short test drive after running the car for a while first, we set off and I asked why the engine management light was on and he said not to worry it would go off when petrol was put in it as it had been run dry. Being stupid I believed him after him saying if anything went wrong with car they will put it right. It's a very long story but they are trying to get out of putting the car right. I think it needs too much doing to it and want my money back. Could anybody tell me what you think and also what the codes mean please
Caroline 🤔🤔👍👍
#2
#3
Welcome to the forum Caroline,
Good to have you with us at Jaguar forums.
I've copied your post to X-Type forum for advice from members with the same model. Here's the direct link to it:
https://www.jaguarforums.com/forum/x...e-help-187120/
Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the main X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
I've copied your post to X-Type forum for advice from members with the same model. Here's the direct link to it:
https://www.jaguarforums.com/forum/x...e-help-187120/
Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the main X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
#4
Join Date: Mar 2014
Location: Tehama County, California, USA
Posts: 25,207
Received 8,988 Likes
on
5,306 Posts
#5
Join Date: Mar 2015
Location: Dural, Northwest Sydney. Australia.
Posts: 38,977
Received 3,828 Likes
on
2,794 Posts
#6
Join Date: Apr 2012
Location: Summerville, South Carolina
Posts: 24,374
Received 4,185 Likes
on
3,648 Posts
#7
Join Date: Oct 2007
Location: PHX some of the time
Posts: 116,775
Received 6,255 Likes
on
5,455 Posts
Welcome to Jaguar Forums Caroline,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
#8
Join Date: Jan 2014
Location: Delaneys Creek,Qld. Australia
Posts: 28,378
Received 6,317 Likes
on
4,367 Posts