My scanner doesn't show which safety belt and which side airbag.
Scanner says:
B2292 restraint system- safety belt pretensioner status
B2295 restraint system- side impact air bag status
Which side airbag and which belt?
Thanks.
Some extra info. Airbag light blinks (thanks Jag engineers!)34, only one code. It means:
Pyrotecfinic
pretensioner(s),
passenger's side -
circuit malfunction
http://www.cardiagnostics.be/-now/Ja...Flashcodes.pdf
So only one code, maybe second disappeared?

 

Has any work been performed recently that required removal of the seats or B-post trim?

Have you checked all the connections and circuit wiring?

 

Previous owner didn't replace parts after accident. I replaced front airbags today.

 

I have heard that after an actual crash there are some modules that require replacement. No way to reuse them.

Sorry I can't be more clear and I could be wrong too.
.
.
.

 

Obviously airbags if deployed but MAY also be the RCM.

 

not any more and disconnect and reconnect many times fixes the issue by cleaning contacts.

 

Who knows airbag resistance? If I get side airbag code, I'll use resistors to diagnose it. Service manual says to use "fake bags" for diagnosing.

 

Code 22 bad driver side airbag. But it is good! Any ideas?
Airbag resistance is about 2.2 Ohm, I don't like resistance including seat wires, it is about 3-3.5 Ohms
thanks.
BTW, I found video on youtube how to check airbag, resistance should be about 2.2 ohm, same for seat belt.