Long story short, I had to tear the interior of the Boot out to get to the fuel door release. Many Bandaid's later the problem was solved.

However, I ran into a pair of Brown/Brown/White wires that come off the the harness that runs along the rear wall (bumper end) and appear to go to the rear lights and bumper senors. [See pics.]

One the wall above the battery and in front of the Fuel Door is a connector that fits the Brown/Brown/White connector perfectly - though I can not determine what that wire combination is for.

Anyone know what this wire if for?

I don't want to reassemble until I know what to do with this combination.

Thank you!

 

Probably the shipping isolator but study the Electrical Guide if you want to be sure.