Hi lads , I just got my X type 04 2.0L Diesel and have a few jobs to do .

 

Welcome to the forum Bob,

Good to have you with us at Jaguar forums.

Follow this link X-Type ( X400 ) - Jaguar Forums - Jaguar Enthusiasts Forum to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.

Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

You can also visit the UK & Eire Region forum by following this link UK & Eire - Jaguar Forums - Jaguar Enthusiasts Forum to find other members in your region.

Enjoy the forums.

Graham

 

welcome to the forum - enjoy!!

 

Welcome.

 

Welcome to the forum

 

Welcome to Jaguar Forums Bob,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

Welcome aboard Bob.

 

Hello, Bob,
That's how Jaguars steal our hearts; they make us work on them. It's a form of bonding.

Welcome to the forums from ElinorB.
(';')

 

Very nice ride. Congrats! What are your mod plans for it?

 

Hi and welcome aboard, its good to have you here with us here at Jaguarforums

Any useful site information you may need such as how to post pictures, edit signatures, add videos, using the
search facility etc, can be found here within the following link Using JF "How To"

There are lots of members local to you with the same interests with info on local dealers and possible meets.
Regional - Jaguar Forums - Jaguar Enthusiasts Forum

Need a Manual, a TSB, or General Info' about your Jag? Check out our >> DOWNLOAD AREA <<
__________________
Jaguarforums_Facebook
Cheers
Jim

 

I've been busy for the last month or so , welded sills , rear bearing , cv boot , headlights, gear lever boot, hole in the back rest , all my own labour at a cost of 150 euro ish . My NCT is on 30 May and I hope the last thing is reversing sensors . Time to check this site for links and info.

 

cut out leaving a witness of the hole ,to be cut of after welding and a thin wipe of filler




ready for sanding and painting.

 

My work in progress bench . Somewhere to cut up metal and change discs . The extractor is golden.




The owner rents me a corner of his shop for my 2L Spitfire

 

cleaned the back of the PCB in the boot reversing sensors work ok now.

 

hi photo

 

Bob,

You've clearly gone through the car methodically. I hope the test goes OK.

Graham

 

I will be in the UK in a month ish looking for nice 16" wheels . I arrive at Holyhead and then on to the Midlands . Then on to South end on sea. Then the reverse over 2 weeks.

 

I haven't been to Galway since a motoring holiday with my parents more than fifty years ago. It seemed a very long way from Dublin so I'm surprised to find it's only 207 miles. No motorways in those days.

As you'll be going through the Midlands, Steve at SB Wheels could be worth an inquiry:

SB Wheels Jaguar Original Equipment Alloy Wheels

Graham

 

PASSED NCT( MOT ) with flying colours of to Galway to get a tax disc in the morning .

 

Good to hear the NCT went well.

I understand vehicle tax is considerably more painful in Eire than it is is in UK so today could be a less happy one for you.

Graham